Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 51
  1. #16
    umi000's Avatar
    Join Date
    Apr 2011
    Location
    Manila, Philippines
    Posts
    340
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by Todd Helme View Post
    I was thinking about putting it on my car with a DA and small gold pads to see how it applies via machine.
    On a tangent - Todd, do you know where one can get those small gold pads for use on a DA? I`ve been searching for a while now, but the smallest I`ve been able to find are 5.5".

  2. #17
    Icon Detailing BIOLINK's Avatar
    Join Date
    Mar 2009
    Location
    Phoenix area
    Posts
    1,739
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    I had a chance to try 1000p over the holidays. I applied via PC to a Honda Odyssey. It speaks to the thickness of he wax, the PC didn`t spread it as thin as I would hope. Because of a slightly thicker application, the wax took a bit longer to haze. Removal wasn`t difficult, considering, and the end shine was amazing. The van is heading back to the bay area where it sits outside all the time. This is evident by the fact it was covered with tree sap. I am hoping for good longevity to help protect the paint from the owners. I was pleased with the ease of use and end appearance. I have a dark Tacoma coming up in the next week which sits in the AZ sun. I plan on using 1000p again based on the durability qualities.

    Thanks for the write up Todd and the idea for a good durable wax.
    I hear voices in my mind and you’re worried that you’re the freak.

  3. #18
    BobbyG's Avatar
    Join Date
    Jun 2011
    Location
    Rehoboth, MA
    Posts
    1,802
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Hi Todd,

    I`ve always wondered about this wax.

    It appears to be a semi hard paste but lays down nicely on the blue hood. I wonder what makes Finish Kare FK1000P a Hi-Temp Paste Wax when compared to other waxes?

    I`ve often said most detailing products don`t have to break the back to be good.

    Gorgeous results and a well written review!!


    BobbyG

  4. #19
    BobbyG's Avatar
    Join Date
    Jun 2011
    Location
    Rehoboth, MA
    Posts
    1,802
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by umi000 View Post
    On a tangent - Todd, do you know where one can get those small gold pads for use on a DA? I`ve been searching for a while now, but the smallest I`ve been able to find are 5.5".
    I`m not sure how small you`re looking for but Lake Country makes some 4" pads that work quite well for those smaller areas.

    CCS 4 Inch Spot Buffs Foam Pads

    Lake Country Hydro-Tech 4 x 1.25 Inch Foam Pads


    BobbyG

  5. #20
    Just a regular guy Todd@RUPES's Avatar
    Join Date
    Feb 2009
    Location
    Oviedo/Stuart Florida
    Posts
    15,278
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by BobbyG View Post
    Hi Todd,

    I`ve always wondered about this wax.

    It appears to be a semi hard paste but lays down nicely on the blue hood. I wonder what makes Finish Kare FK1000P a Hi-Temp Paste Wax when compared to other waxes?

    I`ve often said most detailing products don`t have to break the back to be good.

    Gorgeous results and a well written review!!
    Hi-Temp "Wax" is really a paste synthetic that has that traditional synthetic gloss with out looking too plastic-like. Thanks for the compliments.

  6. #21
    rzatch's Avatar
    Join Date
    Sep 2011
    Posts
    1,789
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    I`m glasd you cleared that up Todd from your initial post you said it looks like an extra coat of clear and I instantly thought of a candy/plastic look. Although some do like that look and the purist seem to like the nuba look more. Price and durabilty wise it looks to be right inline with 845.

  7. #22

    Join Date
    May 2003
    Location
    Brookfield Ill.
    Posts
    647
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Is FK1000P similar to Collinite 476?

  8. #23
    umi000's Avatar
    Join Date
    Apr 2011
    Location
    Manila, Philippines
    Posts
    340
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by BobbyG View Post
    I`m not sure how small you`re looking for but Lake Country makes some 4" pads that work quite well for those smaller areas.

    CCS 4 Inch Spot Buffs Foam Pads

    Lake Country Hydro-Tech 4 x 1.25 Inch Foam Pads
    Hi Bobby, thanks for the links, but none of them are for the gold pad, which I`ve read is best for applying LSPs, as it works really well in keeping the product on the surface of the pad.

  9. #24
    Rocket's Avatar
    Join Date
    Jun 2011
    Location
    Texas
    Posts
    2,033
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by Todd Helme View Post
    I was thinking about putting it on my car with a DA and small gold pads to see how it applies via machine.

    Todd, did you ever decide to try this out on your car?

  10. #25
    rzatch's Avatar
    Join Date
    Sep 2011
    Posts
    1,789
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Makes you wonder why the pad manufactures only make certain colors in certain sizes. Seems the smaller pads are falling behind.

  11. #26

    Join Date
    Nov 2011
    Location
    SB, CA
    Posts
    120
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Definitely going to put this on after using Dura 105; I`ll try using a DA with a 4 inch pad as well. Thanks for the tip on how much to use!

  12. #27
    addysdaddy's Avatar
    Join Date
    Nov 2011
    Location
    WPB, FL
    Posts
    484
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by Todd Helme View Post
    I was thinking about putting it on my car with a DA and small gold pads to see how it applies via machine.
    Hey Todd, did you ever get around to apply the FK1000p via a DA? Thinking of doing that this weekend and was wondering which application method you would recommend, DA or form pad by hand?

  13. #28
    Icon Detailing BIOLINK's Avatar
    Join Date
    Mar 2009
    Location
    Phoenix area
    Posts
    1,739
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Quote Originally Posted by addysdaddy View Post
    Hey Todd, did you ever get around to apply the FK1000p via a DA? Thinking of doing that this weekend and was wondering which application method you would recommend, DA or form pad by hand?
    I know you are asking Todd but I wanted to mention I have applied by PC using a white polish pad. It spread very well but was a b*tch to remove from the pad. All things considered, I found it just as easy to to apply by hand.
    I hear voices in my mind and you’re worried that you’re the freak.

  14. #29
    Just a regular guy Todd@RUPES's Avatar
    Join Date
    Feb 2009
    Location
    Oviedo/Stuart Florida
    Posts
    15,278
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Yes I applied it to a friend`s car with a four inch red Spot CCS Ultra Soft Red Waxing Pad. It was very easy to get a thin even coat and, at least IME, made the removal a little easier as well (since the coat was so even).

    For me personally, this is how I will apply FK1000P in the future.

  15. #30
    addysdaddy's Avatar
    Join Date
    Nov 2011
    Location
    WPB, FL
    Posts
    484
    Post Thanks / Like

    Re: Quick Review: Finish Kare FK1000P Hi-Temp Paste Wax Review

    Great, just bought the 5.5" hydro tech crimson pads which I`m planning on using for this product. BTW, how did u scoop the sealant out of the tin and onto the buffing pad? Was thinking of a butter knife or plastic razor to skim it out of the can and schmear it onto the pad - do u think that will work? Another thought is to use a foam pad and apply a small section by hand to the paint, then take the DA & spread it out nice and thin over the surface. Not sure the best way to go - your thoughts would be greatly appreciated.

 

 
Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Finish Kare 1000P Hi-Temp Paste Wax????
    By pwaug in forum Detailing Product Reviews
    Replies: 36
    Last Post: 03-27-2017, 01:18 PM
  2. Finish Kare Extra Slick Final Body Shine #425: Quick Review
    By Swanicyouth in forum Detailing Product Reviews
    Replies: 35
    Last Post: 07-06-2014, 12:21 PM
  3. Replies: 0
    Last Post: 05-01-2012, 07:13 PM
  4. Finish Kare Sampler Review: 118/121/330/2180//Pink Wax/108/425
    By opensob in forum Car Detailing Product Discussion
    Replies: 20
    Last Post: 04-22-2006, 05:07 PM
  5. Initial review of Finish Kare FK1 Pink Wax
    By Scottwax in forum Car Detailing Product Discussion
    Replies: 63
    Last Post: 01-27-2005, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •