Page 1 of 2 12 LastLast
Results 1 to 15 of 20
  1. #1

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    Long Haul Polish is my current favorite polish for finishing up by hand after the machine. It is very cost effective and seems to work as good if not better than some of the other expensive products I`ve used. This is the last product I used. I`ve also used zepher, ez reflections, and countless others. This long haul was on sale last time I was in so I stocked up. I believe it was 12.00 for the 24 oz.



    I use these terry cloth towels folded into 1/4s for application as well as removal. The areas I do are usually large so they usually become saturated with polish and very loaded up with black oxidation. If i`m feeling cheep i will recycle the cleanup wipe down ones to application for next time. At this price they get tossed after i`m done with them. I`ve tried washing by hand to get the "heavy stuff off" and then tossing in the washing machine but it makes a mess! Not worth it.





    Here is a quick overview of the essentials hardware for machine pollishing.

    The uppper right two wheels are pretty well spent, but they are from top down. Red and blue. Red is the highest cutting, blue is less agressive than the yellow. They start out as 8" wheels







    Here are the 2 compounds up close from the pic above.

    Green is for stainless steal, the white is a final pass clean up step.


  2. #2

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    Heres a preview.



    This project started because one of the aluminum rims on a semi had a crack and needed to be replaced. The other rims weren`t too far gone but they needed a polish to not look rediculous next to the shinny new alcoa rim.

    Starting off with a pic of the new and another of the old- both with fresh rubber.





    Ok now to start off with the process. The rims were cleaned up with Truck and Trailer wash by Zep. Its a strong soap that WILL dull aluminum some but it does a good job of cleaning it up to prep for polishing. These rims had tar, and some road stripe paint on them but the pics are after it was all removed.

    When rims are farther gone than these I hit them with Zep alum. Its a strong acid that will dull the metal good. It workes at getting out all the grime from the pits and pores of rough aluminum.

    Since these wheels weren`t too bad i was able to use the yellow wheel with the green stainless steel specialized compound. As you can tell from many trial and error runs i`ve come up with some different combos than the manufacture advertises.







    These pics show how the polish is applied to the wheel and the general way this type of polishing wheel is used. Its a two hand project once you get going so i don`t have any in action. Its also quite dirty so i didn`t take the gloves off and get in there with the camera in between steps. I finished up with a white (no cut wheel) and white rouge. They were cleanedup with the Long Haul polish by hand by a terry towel as pictured in the begining of this post.

  3. #3

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    Here is a before of the old rim





    This is the after- Notice the alcoa decal got the color polished off of it.

    Here is one of a similar angle for the fresh out of box Rim.



    A couple more befores- trying to show clarity





    Afters of the one I did first then the New one





    Finally there are two outside ones. The rim that is mounted on the truck is the new alcoa and the one leaning next is one being followed from start to finish.




  4. #4

    Join Date
    Apr 2011
    Location
    New Jersey
    Posts
    13,224
    Post Thanks / Like
    That used wheel didn`t look like raw aluminum before you polished it--did it have some sort of paint or coating on it?

  5. #5

    Join Date
    Aug 2005
    Location
    Sammamish, WA
    Posts
    126
    Post Thanks / Like
    What do you charge to do that?

  6. #6

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    The rim was factory alcoa. It was older and many monthes since its last polishing. My guess from memory would be about 8 monthes at best. I take care of all the metal for all the trucks by this company so i loose track of when I did each truck. Remember trucks like this put on many miles and the winters here in MN are uncoated aluminums nightmare with all the salt and other de-iceing products used these days.

  7. #7

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    Quote Originally Posted by Jordan@DD
    What do you charge to do that?
    They get a deal from me. Its a business owned by my dad and uncle. When ever I get time or its convienient for me I will polish a tank or two... Rims when they get new rubber, or the paint too.

    As far as doing it for others it all depends on if i have to drive, the condition of course because it can vary widely, and if the rim will be removed from the truck.

  8. #8

    Join Date
    Jan 2002
    Location
    Atlanta, GA
    Posts
    8,402
    Post Thanks / Like
    Very nice work!!!



    I saw all the equipment you use at the "75 chrome shop" on I-75 south of Ocala, FL.



    I was about to post the results I got from the powerball and blue magic polish on some alcoa`s.
    Bryan Burnworth - Atlanta Car Detailing - Peachstate Detail LLC

    Selected as one of the top nine detailers in the US by Autoweek

    Published in the 356 Registry

    The only exclusive Opti-Coat Pro specialist in Atlanta

    All PPF work done by the best in Atlanta Derek Johnson of Atlanta Protective Films

    Follow Peachstate Detail LLC on Facebook here.

  9. #9

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    Thanks,

    Lets see how the poweball does, post em up. I`ve never used a powerball what are your thoughts? They don`t seem like they would last long.

  10. #10

    Join Date
    Jan 2002
    Location
    Atlanta, GA
    Posts
    8,402
    Post Thanks / Like
    Quote Originally Posted by mtmaher1
    Thanks,

    Lets see how the poweball does, post em up. I`ve never used a powerball what are your thoughts? They don`t seem like they would last long.


    Alcoa wheels from a topkick



    I have only done these wheels and another set where I had limited use due to the design with this powerball. So longevity I can`t comment on. I would think that as long as not too many shape edges, it should last a good while.



    With the amount of wheels you do, I think you would be an ideal candidate for a durability test of the power ball.
    Bryan Burnworth - Atlanta Car Detailing - Peachstate Detail LLC

    Selected as one of the top nine detailers in the US by Autoweek

    Published in the 356 Registry

    The only exclusive Opti-Coat Pro specialist in Atlanta

    All PPF work done by the best in Atlanta Derek Johnson of Atlanta Protective Films

    Follow Peachstate Detail LLC on Facebook here.

  11. #11
    I like cheese. AMDin93103's Avatar
    Join Date
    Apr 2004
    Location
    Santa Barbara, Ca
    Posts
    802
    Post Thanks / Like
    Quote Originally Posted by Jordan@DD
    What do you charge to do that?


    Quote Originally Posted by mtmaher1
    .... it all depends on if i have to drive, the condition of course because it can vary widely, and if the rim will be removed from the truck.


    If you would be so kind.... how many minutes would you guess you spent cleaning each of these wheels.



    Thank you!
    -Andrew.

  12. #12

    Join Date
    Nov 2004
    Location
    Western MN
    Posts
    131
    Post Thanks / Like
    I usually figure about 1/2 hour per wheel. That all depends on if I end up doing 2 or 3 passes with different wheels/compounds.



    If the aluminum is in rough shape it is well worth your time to acid wash it before starting. It keeps the wheels from loading up so quickly.

  13. #13

    Join Date
    Mar 2003
    Location
    Philadelphia, P.A.
    Posts
    2,247
    Post Thanks / Like
    Quote Originally Posted by mtmaher1



    If the aluminum is in rough shape it is well worth your time to acid wash it before starting. It keeps the wheels from loading up so quickly.


    That`s exactly what I do with a few dump trucks I take care of. It`s amazing the difference it can make and how quickly it works.



    A word of caution to those who never used acid wash, do your homework with this stuff before working with it....it`s pretty harsh....which you probably can already tell by the name of it.

    "If you want to be rich - work. If you want to be clever - study. But if you want to be happy - do what you really like"

  14. #14

    Join Date
    Apr 2008
    Location
    Austin, TX
    Posts
    12
    Post Thanks / Like
    Superb finish! Can you polish any other finishes with a softer set up? I wonder how that would work with polishing pipes.

  15. #15
    Speed6 Guy's Avatar
    Join Date
    Oct 2006
    Location
    Blaine,MN
    Posts
    64
    Post Thanks / Like
    Great Work. I would love to see some of your work. I live in Blaine MN so I am not sure where you are from. I would love to watch you work and get more info on the products and tools you use.

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polishing Alcoa or other aluminum Bud style wheels or fuel tanks
    By tuscarora dave in forum Boat, Motorcycle, and RV Detailing
    Replies: 11
    Last Post: 03-14-2010, 09:59 AM
  2. Replies: 5
    Last Post: 03-29-2007, 11:05 AM
  3. Alcoa Aluminum Rim Back to New
    By mtmaher1 in forum Auto Detailing 101
    Replies: 5
    Last Post: 05-09-2006, 08:44 PM
  4. What do you use onFord OEM Alcoa wheel ?
    By vwgtivw in forum Auto Detailing 101
    Replies: 5
    Last Post: 03-24-2006, 09:06 PM
  5. Replies: 0
    Last Post: 07-06-2005, 03:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •