Page 1 of 2 12 LastLast
Results 1 to 15 of 29
  1. #1

    Join Date
    Mar 2015
    Posts
    40
    Post Thanks / Like

    White Car Detail Suggestions?

    I have a 2000 Subaru Outback Limited (Champagne Exterior Trim)

    Now I know Im not going to get the great depth that comes with darker paint
    But I was wondering if anyone had any suggestions or preferred methods/product pairs for white vehicles

    I washed-->clayed--> hand compounded/polished--> hand waxed my car three or four weeks ago
    I used a Megs starter pack for everything, Gold Soap, Clay, Ultimate compound and Polish, and Gold Class Carnauba Wax Plus
    I loved the outcome but I was not impressed with how long the protection lasted
    Next week no more beading and the paint no longer had that slippery feel to it.
    The car is parked out in the California elements so that is to be expected to a certain extent but I was surprised at how FAST it deteriorated

    All that need to know minutiae to say this
    I have ordered my first DA - Griots 6" with Megs MF cutting Pads and Lake Country CCS White and Black Pads
    And I will be refining my earlier hand detail job with them
    I will be using Blackfire Crystal Coat as my paint sealant of choice thanks to this wonderful forum

    So I am wondering if there were any suggestions on products or methods of choice to bring my white paint to a brilliant shine from the brilliant minds in this forum

    Any help or additional questions would be greatly appreciated!!
    TIA


    EDIT: i am using the GG6inch included backing plate and ordered all 6.5 inch pads. I am noticing a lot of others recommending a 5" backing plate with the fitting pads stating that 6" doesn`t do the corrections they were looking for.

    Am I wrong in using the 6" BP with 6.5" pads?
    Last edited by YuhDunBenShrunk; 04-02-2015 at 01:15 PM. Reason: New question related to same topic

  2. #2
    Darth Camaro 12/27/15 Don's Avatar
    Join Date
    Dec 2002
    Location
    NE Ohio
    Posts
    2,465
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    You will need compounding/polishing products. While it`s true that white is very difficult to get improvements to show, it IS possible. YOU would be surprised at just how much of a difference they make. I would suggest one of the Meguiar`s twins. Either the professional line (M105/M205) or the consumer version (Ultimate Compound/Ultimate Polish). Both sets of twins are user-friendly and work as advertised. I believe the pro-line stuff is just slightly more aggressive, but essentially they are the same products.
    Don M

    Proud owner of a 2017
    SUPERCHARGED
    Hyper-Blue Metallic 2LT 6/Manual
    Camaro


  3. #3

    Join Date
    Sep 2013
    Posts
    173
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    There should be no difference between the way you detail cars, white or black. The clear coat is the same and that`s what you`re polishing. You need really good lighting to see defects in lighter colors but when a white car is polished to black car standards it`s obvious.

    Robert

  4. #4
    Pay Attention Boy... RTexasF's Avatar
    Join Date
    Jul 2005
    Location
    North TX
    Posts
    2,840
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Is it clear coat or single stage paint? Many of the older white cars are single stage and may require pads & chemicals that are a bit more stout than if used on clear coat.

  5. #5
    mnehls86's Avatar
    Join Date
    Aug 2013
    Location
    Southern Ca.
    Posts
    1,543
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    You are on the right track. The compound and polish should work for you since you already have them. I hear Subaru`s have soft paint so you may be able to get away with just using the ultimate polish on the cutting pad. I would HIGHLY suggest Iron-X for every car but especially white. Where in California are you? If you are in a hotter area wax doesn`t tend to stick around long.

  6. #6
    ShaneB's Avatar
    Join Date
    Jan 2013
    Location
    South Lyon, MI
    Posts
    1,464
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    I would be careful using ultimate polish before moving on to coating. Ultimate polish is more of a glaze isn`t it? So it will leave something on the surface that will not allow a coating to bond properly. Please correct me if I`m wrong.

    I tried megs gold class once and wasn`t impressed. A week sounds about right for a vehicle outside 24/7

  7. #7
    Autopia Specialist RaysWay's Avatar
    Join Date
    Jan 2014
    Posts
    4,832
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Well you just won the BLACKFIRE Crystal Coat kit, so I say coat it! Since this is a lighter colored car, just be sure to have good lighting so you can be sure you knock down any streaks or high spots before it fully hardens.
    Likes Ronkh liked this post

  8. #8
    mnehls86's Avatar
    Join Date
    Aug 2013
    Location
    Southern Ca.
    Posts
    1,543
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Quote Originally Posted by ShaneB View Post
    I would be careful using ultimate polish before moving on to coating. Ultimate polish is more of a glaze isn`t it? So it will leave something on the surface that will not allow a coating to bond properly. Please correct me if I`m wrong.
    The BLACKFIRE kit he just won has a coating prep so no worries. Also Ultimate Polish is a polish and not a glaze so no worries there either.
    Updated! Autopia Polish Comparison Chart

  9. #9

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,975
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Quote Originally Posted by WhyteWizard View Post
    There should be no difference between the way you detail cars, white or black...
    My sentiments exactly! With one exception- white vehicles show rust-blooms/etc. worse, so I`d be even more inclined that usual to do a proper decontamination.

  10. #10

    Join Date
    Dec 2012
    Posts
    418
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Quote Originally Posted by ShaneB View Post
    I would be careful using ultimate polish before moving on to coating. Ultimate polish is more of a glaze isn`t it? So it will leave something on the surface that will not allow a coating to bond properly. Please correct me if I`m wrong.

    I tried megs gold class once and wasn`t impressed. A week sounds about right for a vehicle outside 24/7
    The Ultimate Polish does have some light abrasives in it along with a lot of "polishing oils". You definitely would want to clean the paint with an IPA wipe down or a suface prep cleaner to remove these oils before applying a coating.

  11. #11

    Join Date
    Mar 2015
    Posts
    40
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Wow guys
    I posted this past midnight
    and received 9 useful and intelligent responses before I woke up
    This is why I am loving AF so much
    thank guys for all your responses

    RTexasF
    Is it clear coat or single stage paint?
    I believe it is clear coat, when I did everything by hand I don`t remember the paint coming off onto my MF
    I will keep an eye on my pad though since it is so much more effective
    Also I did buy M105/205 a few days ago and I will probably be using that on this attempt
    just because I`ve heard so many good things

    mnehls86
    Where in California are you? If you are in a hotter area wax doesn`t tend to stick around long.
    I live in the Sacramento area. We do get pretty hot in the summer (low 100s) but I have noticed that it has been a lot hotter recently than it should be at this time of year, so your response makes sense as to why it may not have lasted very long. Also Iron-x is on my list of things to buy.

    Thank you again for all your responses
    They`re making me confident that I have a handle on the application method
    and that my first try with the GG 6" won`t be a total disaster lol

  12. #12

    Join Date
    May 2014
    Location
    Charlotte
    Posts
    130
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    Welcome ! I feel your pain as I have a White Chevy Cruze and while it shines even when dirty... its still not 90-100% perfect though. I tried gold class and it has a better shine than collonite 845 but it definitely doesn`t last very long.

    I was given a sample of Finish Kare 1000 wax that a member on the forums gave me and once I move into my new garage in 1 month I will finally be able to test it out in harsh sun conditions. I will let you know how it turns out. I also have had great results with black Fire wet diamond sealant on my white car too ! Good Luck !

  13. #13

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,975
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    silver2kws6- I simply *LOVED* the FK1000P on the white Crown Vic I used to have. Yeah yeah, I know, I seem to love it on most everything, but it really made that car look great despite its rather FUBAR paint. The prep does matter with white, so fix any marring and use a good final polish, but if it made *that* car look great it oughta be good on your Cruze.

  14. #14
    wdmaccord's Avatar
    Join Date
    May 2013
    Location
    West Des Moines, IA
    Posts
    507
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    I would recommend polishing with the white pad on the GG6 before stepping up to the MF pads. Best way I have been able to see defects on a white car is in a dark garage with an LED flashlight. Move the light around at different angles.
    Likes aceone liked this post

  15. #15
    Autopia Specialist RaysWay's Avatar
    Join Date
    Jan 2014
    Posts
    4,832
    Post Thanks / Like

    Re: White Car Detail Suggestions?

    I remember when I was detailing a white Toyota Camry , Mike Phillips came into the Show Car Garage and gave me great advice when detailing white vehicles. He told me contrast is king on white cars. In other words, make the white (paint) as white as possible by thoroughly decontaminating with Iron X and clay followed with polishing (as needed). But also make the black trim and black tires look as dark as possible.
    Likes mnehls86, silver2kws6, aceone liked this post

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Suggestions needed on a white 4Runner
    By Peanuthead in forum Car Detailing
    Replies: 8
    Last Post: 12-05-2009, 09:07 AM
  2. Replies: 13
    Last Post: 10-20-2007, 09:08 PM
  3. White Paint Suggestions
    By Bellydawg in forum Auto Detailing 101
    Replies: 1
    Last Post: 07-07-2006, 10:57 AM
  4. Need a NON-white wax for a white car. Suggestions?
    By Colin in forum Car Detailing
    Replies: 9
    Last Post: 06-20-2002, 10:33 AM
  5. FI-2 hazing my white Tundra, any suggestions?
    By Jmunk in forum Car Detailing
    Replies: 8
    Last Post: 01-01-1970, 12:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •