Menzerna or 3d hd

[Danmc]

I`m trying to decide on products for my cars and work van. I have a black 2010 Altima, 2009 blue RDX and red work vans. I will use a PC da polisher. I have Meguiars and Chemical Guys Hex pads. I will be using Blackfire as the lsp. My question is about the polishing. I narrowed it down to Menzerna pf2500 and sf4500 or 3d hd cut and polish. I am looking for the best finish with out causing any damage. Thanks guys

[ZL1Mark]

HD Cut and Polish.

[House of Wax]

Probably can`t go wrong with either, but I love HD`s polishes

[JSFM35X]

I love the menzerna products. Been using them for years. The HD products are growing in popularity and I cant tell you a thing other than the guys above me know what they are doing so it must work.

There are a lot of good products that can get you where your headed. I used the Menzerna products when I has my black M35X as there was no HD back in 2008

[Envious Eric]

menzerna - fg300 and 4000 = killer combo with great cut and finishing ability

[WaxAddict]

Menzerna pf2500 and sf4500

[Justins00ss]

Pretty much use Menzerna products. Mainly FG400 and SF4000. Also have pf2500 and ip2000. I did just buy a bottle of HD speed to try out on a customers black truck Sunday.

[Ecrissman]

I`ve used Menzerna for years. Tried other products like most everyone else looking for something new and better and always return to Menzerna. They work flawlessly all the time, everytime (I use a rotary or Flex 3401xc). You will be happy with them. That being said I recently used a couple 3D HD products and have been very satisfied with the results. I do not have experience with the entire line of 3D HD products, only speed and poxy.

[Danmc]

Thanks guys. I`m going with the Menzerna.

[wendell jarvis]

Menzerna..
enuff said. ..lol

[Paul Sparks]

Flip a coin and then buy both. I have both on my shelf.

[silverfox]

When it comes to finishing polish, I shelved my Menz PO85rd...for HD polish. Not even a fair fight.

[EXPDetailing]

HD Cut compares more to Menzerna FG400, not 2500. If you need a compound for heavy correction, pick the FG400 or the HD Cut. Then, either polish you mentioned will finish it off.

[Accumulator]

HD Polish is incredibly user-friendly, I was really surprised when I finally tried it.

[52split]

Menzerna FG400 and CarPro Reflect. 😀