Page 3 of 8 FirstFirst 12345678 LastLast
Results 31 to 45 of 119
  1. #31

    Join Date
    May 2003
    Location
    Brookfield Ill.
    Posts
    647
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    What about BH followed by Collinite 476.

  2. #32

    Join Date
    Sep 2002
    Location
    NE Ohio
    Posts
    86,975
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Larry A View Post
    What about BH followed by Collinite 476.
    That would almost certainly look better than the BH followed by FK1000P on any colors other than white/silver/etc. Just wouldn`t last as long before needing redone.

  3. #33

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    I received the BH and EX today and used both. Perhaps I didn`t apply correctly, but I saw no visible improvement in the swirls.

    I just applied to the hood. I washed the entire hood, then clayed the entire hood and washed again. Then I applied Klasse AIO. Then I applied the BH to just one half of the hood and saw no improvement. I applied and let it sit for about a minute, and buffed off. I did this 3 more times and still saw no improvement. At this point I added the EX sealant, and that didn`t seem to add any filling either. I then added 2 layers of Souveran, and still no filling.

    The only positive I noticed from using the Poorboy`s products was that flakes in the paint seem to pop out a bit more now. But I really saw no filling of the swirls. Did I do something wrong?

  4. #34
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by MackCollier View Post
    I received the BH and EX today and used both. Perhaps I didn`t apply correctly, but I saw no visible improvement in the swirls.

    I just applied to the hood. I washed the entire hood, then clayed the entire hood and washed again. Then I applied Klasse AIO. Then I applied the BH to just one half of the hood and saw no improvement. I applied and let it sit for about a minute, and buffed off. I did this 3 more times and still saw no improvement. At this point I added the EX sealant, and that didn`t seem to add any filling either. I then added 2 layers of Souveran, and still no filling.

    The only positive I noticed from using the Poorboy`s products was that flakes in the paint seem to pop out a bit more now. But I really saw no filling of the swirls. Did I do something wrong?

    You need to let klasse cure........ But bh really doesn`t play will with klasse.

    And you may need 2 coats of bh

    Look for a thread of mine called it`s a cover up
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!

  5. #35
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,543
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Ronkh View Post
    You need to let klasse cure........ But bh really doesn`t play will with klasse.

    And you may need 2 coats of bh

    Look for a thread of mine called it`s a cover up
    you will not see the products fill as the Klasse is sealing the surface and will not allow the Black Hole to do its job .. try removing the klasse from a section and then redo without
    life is short ..do it while you can

    e-mail info@poorboysworld.com

  6. #36
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Probably won`t come up due to the `

    So here are some pics:
    Dealer washed car with brush, then dried....... Looked a lot worse in person:




    After 1 app of BH




    After 2 apps of bh




    After Natty`s blue




























    Next day in sun




    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes MackCollier liked this post

  7. #37

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Poorboy View Post
    you will not see the products fill as the Klasse is sealing the surface and will not allow the Black Hole to do its job .. try removing the klasse from a section and then redo without
    I went back and checked the thread and I wasn`t very clear. I had asked about using the Klasse twins and I believe Ron said no, but I assumed that meant that Klasse SG was the problem, but it looks like both you and he were actually saying that NEITHER AIO or SG would work well with BH?

    Just to clarify....I can`t use Klasse All-In-One with the BH?

    Assuming that`s the case, what`s the best way to remove AIO? Yes I am well on my way to wasting wax

  8. #38
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,543
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by MackCollier View Post
    I went back and checked the thread and I wasn`t very clear. I had asked about using the Klasse twins and I believe Ron said no, but I assumed that meant that Klasse SG was the problem, but it looks like both you and he were actually saying that NEITHER AIO or SG would work well with BH?

    Just to clarify....I can`t use Klasse All-In-One with the BH?

    Assuming that`s the case, what`s the best way to remove AIO? Yes I am well on my way to wasting wax
    yes klasse doesn`t play well with others

    a light polish should remove the AIO

    just curious but is this a repaint ?
    life is short ..do it while you can

    e-mail info@poorboysworld.com

  9. #39

    Join Date
    Aug 2015
    Location
    College Station, TX
    Posts
    795
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    To add (in case another point of confusion):
    The Blackhole should be the first thing applied to the clean / clayed paint, then your Sealant (EX, FK1000p, Collinite 476, etc.), then your wax topper (Souveran).

    As Poorboys mentioned, applying BH over an existing selant or wax won`t let the fillers do their job.

    Nick
    Likes MackCollier liked this post

  10. #40

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Poorboy View Post
    yes klasse doesn`t play well with others

    a light polish should remove the AIO

    just curious but is this a repaint ?
    Original paint. Does Poorboy`s make a product that would clean the AIO off the paint without affecting the clearcoat? I really don`t want to remove any of the clearcoat, I would much rather fill the swirls then seal, which is why I bought BH and EX to begin with. Thanks!

  11. #41
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,543
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by MackCollier View Post
    Original paint. Does Poorboy`s make a product that would clean the AIO off the paint without affecting the clearcoat? I really don`t want to remove any of the clearcoat, I would much rather fill the swirls then seal, which is why I bought BH and EX to begin with. Thanks!
    Professional Polish
    Polish w/ Carnauba .. is like AIO on steroids but will work with the Black Hole
    Polish w/ Sealant

    all of these are non-abrasive and all are available at the Autopia store
    life is short ..do it while you can

    e-mail info@poorboysworld.com
    Likes MackCollier liked this post

  12. #42

    Join Date
    Aug 2016
    Posts
    41
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by Poorboy View Post
    Professional Polish
    Polish w/ Carnauba .. is like AIO on steroids but will work with the Black Hole
    Polish w/ Sealant

    all of these are non-abrasive and all are available at the Autopia store
    Thanks, I noticed the Poorboy`s polish w carnuba - Poorboy

    OK....just so I don`t screw up again. If I get the Polish w/Carnauba, I wash the car, then apply the polish THEN apply the Black Hole THEN apply the EX sealant THEN top with Souveran?

    All that and I`m good?
    Likes Poorboy liked this post

  13. #43
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,543
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by MackCollier View Post
    Thanks, I noticed the Poorboy`s polish w carnuba - Poorboy

    OK....just so I don`t screw up again. If I get the Polish w/Carnauba, I wash the car, then apply the polish THEN apply the Black Hole THEN apply the EX sealant THEN top with Souveran?

    All that and I`m good?
    you got it !! and then reapply the Souveran as needed
    life is short ..do it while you can

    e-mail info@poorboysworld.com
    Likes MackCollier liked this post

  14. #44

    Join Date
    Aug 2015
    Location
    College Station, TX
    Posts
    795
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    You forgot the last step. Submit a "Wax-Waster" membership application to Ron.

    Good luck!!

    Quote Originally Posted by MackCollier View Post
    Thanks, I noticed the Poorboy`s polish w carnuba - Poorboy

    OK....just so I don`t screw up again. If I get the Polish w/Carnauba, I wash the car, then apply the polish THEN apply the Black Hole THEN apply the EX sealant THEN top with Souveran?

    All that and I`m good?
    Likes Ronkh, MackCollier, Old Pirate liked this post
    Thanks Ronkh thanked for this post

  15. #45
    Wax Waster Ronkh's Avatar
    Join Date
    Mar 2008
    Location
    SwFL
    Posts
    27,090
    Post Thanks / Like

    Re: Advice on filling swirls, will this process work?

    Quote Originally Posted by nickclark08 View Post
    You forgot the last step. Submit a "Wax-Waster" membership application to Ron.

    Good luck!!


    Not for one coat.........
    Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
    Likes nickclark08, MackCollier, JustJesus liked this post

 

 
Page 3 of 8 FirstFirst 12345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Product Filling - What`s your process to determine it??
    By David Fermani in forum Car Detailing
    Replies: 15
    Last Post: 03-02-2012, 10:42 PM
  2. Filling swirls, qd with fillers?
    By ron231 in forum Car Detailing
    Replies: 7
    Last Post: 02-01-2007, 09:27 PM
  3. Replies: 2
    Last Post: 07-11-2006, 01:56 PM
  4. New guy need a process to get rid or swirls
    By TacomaWillis in forum Car Detailing
    Replies: 2
    Last Post: 05-15-2006, 02:17 PM
  5. Will this process work?
    By CaliPhotog in forum Car Detailing
    Replies: 5
    Last Post: 08-10-2005, 02:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •