Post Thanks / Like - 3 Likes, 0 Thanks, 0 Dislikes
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!Post Thanks / Like - 2 Likes, 0 Thanks, 0 DislikesMackCollier, Poorboy liked this post
Post Thanks / Like - 1 Likes, 0 Thanks, 0 Dislikesnickclark08 liked this post
MackCollier- Hey, that *will* be an interesting comparison! Wonder if the M26 will mute the flake any..
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesMackCollier liked this post
To the OP, how bout a little investment on a PC machine? So those nasty swirls that everyone is talking bout will be a thing of the past and you can layer any LSP product you want and get that shine your looking for. Just my 2 cents........
AutopiaForums is the place to be.
Remember to Shop Autopia-CarCare.com for your Detailing Needs!Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesRonkh liked this post
Post Thanks / Like - 2 Likes, 0 Thanks, 0 DislikesPoorboy, Old Pirate liked this post
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesPoorboy liked this post
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesMackCollier liked this post
Ah, good point Ron. I can see how that would be beneficial
MackCollier, follow what Ron said
Post Thanks / Like - 2 Likes, 1 Thanks, 0 DislikesMackCollier, Ronkh liked this postRonkh thanked for this post
No point in correcting marring until the wash/etc. regimen is sorted to where it won`t need done again for ages (and I don`t mean just a year).
I got the SSR1 and Natty`s Red in today. Applied the SSR1 by hand and saw no improvement in the swirls. I did notice the surface of the paint was a bit smoother. I then applied the Black Hole by hand with EX-P sealant over it, and buffed both off, and no improvement to the swirls either. I guess I`m just not doing a good enough job working the product into the paint by hand.
So I`m assuming I just need to forget trying to do it by hand and need to get some pads to do the job with my Porter Cable.
Looking at the selection of Lake Country pads - Lake Country CCS Dual Action 5.5 Inch Foam Pads
Would these pads work to apply each?
SSR1 - White or Orange, which would be better?
Black Hole - Blue or Gold?
EX-P - Red
Natty`s Red or Souveran by hand.
Also I preferred the look of the Natty`s Red over #26. The Red seemed glossier, and I loved how thin it was, didn`t take much, it should last a long time.
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesJustJesus liked this post
I`m wondering if Rasky was right; maybe the swirls are too deep to make any real difference with filling. Any chance you can post a pic?
I very recently tried to cover up some swirls, light scratches myself. Two test spots. One was White Diamond (BH, but white) and the other was a light polish with Pro Polish on a black pad, followed by White Diamond. Both looked better than what I started with. The PP + WD side was better than the WD side. BUT, both still had too much for my liking. The PP/WD side just *might* be enough for this particular veh, but I want to see it in some good sun. We`ve been having overcast and rain lately
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks