If I put glaze on top of glaze am I defeating the previous layer ? I would be sealing last.
sent from me
If I put glaze on top of glaze am I defeating the previous layer ? I would be sealing last.
sent from me
I don`t believe so, I`ve never tried it myself but I`ve seen people talk about using multiple layers of glaze
Post Thanks / Like - 0 Likes, 1 Thanks, 0 DislikesMary B thanked for this post
All that glaze will wash off the first time you wash the car..
One really good glaze - Meguiars Nbr-7, from decades back..
Dan F
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesMary B liked this post
[QUOTE=Stokdgs;2061751]All that glaze will wash off the first time you wash the car..
One really good glaze - Meguiars Nbr-7, from decades back..
Dan F[/QUOTE
After 11 coats I will seal it?
sent from me
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesRonkh liked this post
Maybe this will answer your question:
Audi S4 Widebody - Paint Correction/PPF Installation -
The car had an improper use of glaze. Glaze is, IMHO, good for superficial and light swirls. Whoever did the car ignored the fine line and ran way past it.
Post Thanks / Like - 1 Likes, 1 Thanks, 0 Dislikesrlmccarty2000 liked this postMary B thanked for this post
Mary
here`s my suggestion-and I`ve used this with great success several times since I started doing it
One layer of Poorboy`s Black Hole (or white hole glaze), one layer of Poorboy`s EX (the one w/carnauba). wait an hour, add another layer of EX, repeat the hour wait and EX as much as you like as the EX Will layer and it Will fill in a little bit of marring each time
now it won`t fill like a glaze but it will start to make a noticeable difference after the 3rd coat
that is what I did on the (black parts) of an Orange Charger SRT8 that had paint too thin for me to feel safe polishing very aggressively (as it was painted black over the orange and so the black was obviously much thinner than the readings would indicate)
here`s the thread-
http://www.autopia.org/forums/click-brag-the-detailers-showcase/184206-hemi-orange-charger-srt8.html?highlight=hemi+orange+on+fire
it`s a lot of work, but somebody had to do it
So much 512detail
Post Thanks / Like - 1 Likes, 0 Thanks, 0 Dislikes512detail liked this post
I`ve done 2-3 layers of black hole then used natty`s blue to get rid of dealer induce swirls on a jb bmw. Worked well
look for a thread called something like it`s a cover up
Formerly the "Best Detailer", now just Super Wax Waster Man. Not necessarily tactful, but normally right. It`s good to be da King !!!
before
1 coat:
2 or 3 coats:
Finished w Nattys blue:
Next day:
So what`s the consensus around here with using glaze then topping it? Does the glaze get sealed in? Does the glaze hurt longevity of the wax/sealant?
IME the glaze does get sealed in, but not necessarilly for as long as the LSP lasts (issues can "come back" while the LSP is still healthy). IMO it`s still worth doing and *no*, to my surprise (and contrary to what a lot of people have said on the internet), I`ve never had an underlying Glaze hurt the longevity of my LSP, not when I first did a comparison back in the `70s, and not now.
But I do believe that this is one of those !YMMV! things as there are just so many variables, so if you roll the dice I hope it works out for you the same as it did for me.
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesWaxAddict liked this post
This thread has made me curious, let`s say that glaze does affect LSP longevity. Has anyone ever sandwiched the glaze, i.e., sealant or montan wax | layer of glaze | sealant or montan wax or LSP, between LSP`s?
I maybe, but when I typed that, I wasn`t paying the upmost attention to the posts. I thought that Ronkh had layered an LSP and not a glaze in the pictures above. However 512detail had success in layering EX w/nuba, so it had me thinking, one layer of protection that kind of fills, then add glaze to fill, then seal.
Post Thanks / Like - 1 Likes, 0 Thanks, 0 DislikesRonkh liked this post
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks