HD Speed Polisher Unboxing

[Ben@3D]

Have a look at our HD Speed Polisher.





New version of the polisher has a higher gauge cord to last longer than ever.

Available at 3D products.

[allenk4]

I understand that individual Forum users are allowed to discuss products that are not carried by Autopia and even suggest where an item that Autopia carries can be found less expensively.

This is is the 1st time I have seen a Representative of a Manufacturer/Re-labeler post a product not carried by Autopia.


Best case scenario is that Autopia is planning on selling this item.



Worst case scenario, 3D has made a terrible mistake by using this forum to drive sales of this polisher thru their other distribution channels.

[JustJesus]

I`m not so sure, allenk4, as this was posted on the SPONSORED FORUMS section.

[JSFM35X]

Is this the actual polisher or another teaser video like the dilutable iron remover that was going to be inexpensive ? Between that video and the spam o Rama when you required multiple posts for free product I just can`t get excited about any product you hype. Sorry but keeping it totally honest.

Your credibility is so low with me it could crawl under a pregnant ant.

[Stokdgs]

Careful ! These guys like to Dislike anything that is not about their world...
Dan F

[craigdt]

Yay! Another option- this is good news.
Can you list the specs here for us?

[GearHead_1]

This thread is appropriate as 3D is an approved forum sponsor. This thread is in 3D`s sub-forum.

[JSFM35X]

I generally don`t get into it with anyone on the net but this company rubs me the wrong way.

My world, you world ? Our world bro.

Careful ! These guys like to Dislike anything that is not about their world...
Dan F

[RDKC]

I generally don`t get into it with anyone on the net but this company rubs me the wrong way.

My world, you world ? Our world bro.

New hashtag: #allpolishersmatter

The video wasn`t exactly exciting but, it looks pretty nice except the color. I like to keep my options open... and I`m still on my GG6.

[craigdt]

#polisherlivesmatter


• Voltage: 120V, 60Hz, 6 ampsx
• Speed: 2000-6000 OPMx
• Spindle Thread: 5/16” - 24 UNFx
• Motor: 710 Wattsx
• Orbit: 8 mm throwx
• Cord length: 10 ftx
• Dial: 6 Variable Speeds

[Brewins]

Cool. Let`s see it in action.

[BadgerRivFan]

New hashtag: #allpolishersmatter

it looks pretty nice except the color...

Agreed! My initial reaction was "What a pretty purple/lilac color to compliment my Pink Flex 3401!"

[512detail]

wow, tough crowd

[RaysWay]

Is this the actual polisher or another teaser video like the dilutable iron remover that was going to be inexpensive ? Between that video and the spam o Rama when you required multiple posts for free product I just can`t get excited about any product you hype. Sorry but keeping it totally honest.

Your credibility is so low with me it could crawl under a pregnant ant.

It`s the actual polisher that you can buy from their website right now: HD Speed Polisher - 3dproducts

It sucks to hear you have a bad taste in your mouth with 3D. I`ve had nothing but great experiences with all of their products and I know a lot of other detailers have too. I think I see HD Cut, HD Polish, and HD Speed recommended more than any other polishing system on here for a reason - because they work.

Also, 3D BDX did end up being one of the least expensive iron removers on the market (cost per oz). I think it`s the least expensive one sold on Autopia or PBMG - especially if used diluted. I won`t shun a company because they entered the market with one of the most cost effective iron removers just because it was delayed. I can understand getting a little upset about the delay, but I won`t turn into an Outback Steakhouse hater just because my bloomin onion came out after my ribeye.

I understand that individual Forum users are allowed to discuss products that are not carried by Autopia and even suggest where an item that Autopia carries can be found less expensively.

This is is the 1st time I have seen a Representative of a Manufacturer/Re-labeler post a product not carried by Autopia.

Best case scenario is that Autopia is planning on selling this item.

Worst case scenario, 3D has made a terrible mistake by using this forum to drive sales of this polisher thru their other distribution channels.

You`ve identified the differences between a sponsored forum. Forum sponsors are allowed to post any of their products, sales or information; even if we don`t carry it.

wow, tough crowd

This is Autopia It`s always been a tough crowd. I`m guessing we`re the kids who had to go to school on Saturday morning lol.

[JSFM35X]

You left out the spam O Rama. Not sure you were here for that.

that was a nightmare.

On on a side note the blooming onion rules. On my scale the blooming onion is on one side and 3D is on the other.

i was ready to plunk down my money on the product that was used by Tunch in the Audi video. The one that bled like, well like crazy.

Best of my understanding months went buy. And we were all told it`s coming soon. Final r and d. Blah. Blah. Blah. They they release it like this is it (what you saw in the video). But no it`s certainly not. What we got was nothing like the video based on people who bought it.

Ill stick with iron x for now. Possibly try another if the price / performance is there. I use about 1 litter per car and only use it when. I`m doing a complete detail. so it`s an expensive piece of the detail trumped only by the coating. I was looking forward to a concentrate. I waited and waited and it never showed up. You can dilute all iron removers. They just work poorly when you do. I suppose you can water your milk or beer down too but that dose not make the original liquid a concentrate does it. Guess that`s really my point.

Enjoy your day all.

It`s the actual polisher that you can buy from their website right now: HD Speed Polisher - 3dproducts

It sucks to hear you have a bad taste in your mouth with 3D. I`ve had nothing but great experiences with all of their products and I know a lot of other detailers have too. I think I see HD Cut, HD Polish, and HD Speed recommended more than any other polishing system on here for a reason - because they work.

Also, 3D BDX did end up being one of the least expensive iron removers on the market (cost per oz). I think it`s the least expensive one sold on Autopia or PBMG - especially if used diluted. I won`t shun a company because they entered the market with one of the most cost effective iron removers just because it was delayed. I can understand getting a little upset about the delay, but I won`t turn into an Outback Steakhouse hater just because my bloomin onion came out after my ribeye.



You`ve identified the differences between a sponsored forum. Forum sponsors are allowed to post any of their products, sales or information; even if we don`t carry it.



This is Autopia It`s always been a tough crowd. I`m guessing we`re the kids who had to go to school on Saturday morning lol.