Red Corvette C6
I was called to come out and inspect this car one day because it had been in a shop and had gotten some overspray that needed removal. Upon inspecting the car, i found there were some light swirls, along with RIDS in a few isolated spots. I decided that a two-stage polishing job would get the car to 99% perfection, and the owner agreed, so i got to work.
Cleaning
Exterior
-Wash
-1Z Anti Insekt
-CG CWC
-Meg's mitt
-P21s TAW
-Wheels
-CG CWC
-P21s Gel
-P21s TAW
-EZ detail brush
-Swissvax wheel brush
-OXO tire scrubber
-ARO
-Wheel Wells
-Meg's APC+
-DD wheel well brush
-Swissvax Wheel brush
-über wheel brush
Engine
-P21s TAW
Convertible top
-ARO
Clay
-Special yellow poly clay
-ONR lube
Polishing
-Exterior paint
-Menzerna SIP via Orange über pad
-Menzerna PO85RD via blue über pad
-Makita 9227C
-3M Yellow Foam Backing Plate
-1000w halogen lights
-Brinkmann Dual Xenon
-ISA 50/50 wipedown
-DD über MF towels
-Racatac
LSP
-Paint
-Dodo LPL
-Rubbish Boy's OE
-Optimum QD
-FK1# 425
-CG 530XL MF towels
-Wheels
-Swissvax Cleaner Fluid
-Swissvax Autobahn
-FK1# 425
-CG Barebones (wheel wells)
-Optimum Opti-bond
Engine
-Meg's Hyperdressing
-Swissvax Autobahn
-1z chrome Polish
Convertible Top
-Raggtopp fabric protectant
Glass
-Sprayaway glass cleaner
Interior
-CG Leather Cleaner
-Zaino Z10
-1Z Cockpit
Before:
you can see that the car has some settled dust, and the lower portions including the wheels needed some serious cleaning.
Here's what the car looked like after being all cleaned up and after clay bar decontamination.
you can see te light swirls and scratches
Linear Mode
