My process for the correction was
M105 Via the
Flex 3401 on a
Meguiar’s W7207 foam pad. I followed that up with M205 via the rotary with a
Meguiar’s W9207 foam pad. A few RIDS remained but they are very hard to see given the color. My LSP was
Wolfgang DGPS (x2).
After: (Sorry it was cloudy with off and on rain…I’ll get sun shots tomorrow)
Brinkmann
Halogen
Door jambs were cleaned with APC and then polished by hand with KAIO. Weather stripping was protected with
Meguiar’s
M40
A little dust on the wheels from pulling the car around…I touched that up.
Interior carpet was done using APC, Bissell LGM, Folex, Carpet brush, and a shop vac.
Leather was clean with Leather Masters Strong Cleaner and then protected with Leather Masters Protection Cream
Vinyl, dash, and trim was clean with Meguiar’s QID
Engine was cleaned with APC+, various brushes, wash mitt, and then dressed with Meguiar’s Water Based Dressing.
16+ hours invested…
Thanks for looking,
Rasky