This is the 2nd time i detail this car. The last time was almost 6 months ago. The protection had completely worn off, and there was some water spots all over the car. I initially tried CG waterspot remover to try and remove them, but they didn't budge, so i had to resort to polishing them out. Plus the owner washes the car about 3 times a week, so there was all sorts of marring from washing.
Exterior[b]
-
Wash
-1Z Anti-Insekt
-CG CWC
-white shMITT
-
Wheels
-CG CWG
-P21s Wheel Cleaner Gel
-EZ detail brush
-Swissvax wheel brush
-OXO tire scrubber
-white shMITT
-bleche wite
-
Wheel Wells
-ARO
-EZ detail Brush
Clay
-Special Yellow Clay
-ONR lube
Polishing
-
Exterior paint
-Menzerna SIP via
Orange CCS pad @ 1000-2000RPM
-Menzerna PO85RD via blue 3M Ultrafina pad @ 1500-2000RPM
-Makita 9227C
-3M backing plate
-1000w halogen lights
-ISA 50/50 wipedown
-
Wheels
-1Z Chrome Polish
LSP
-
Exterior Paint
-1z Glanz Wax
-FK1 # 425
-
Wheels
-Swissvax Autobahn
-FK1 # 425
-Optimum opti-bond tire gel
-CG Barebones (wheel wells)
Extras
-Stoner's Invisible Glass
-1Z Glass Polish
-1Z Gummi Pflege
Interior
-CG Leather Cleaner
-CG Lightning Fast carpet cleaner
-1Z Cockpit Premium
-Zaino Z10
-Stoner's Invisible Glass
Before Pics
1z Anti-Insekt doing it's job.
clay wasn't too contaminated...
after clay
taped up and ready to polish
i started out trying a 50/50 with 106FF and a white CCS, but that didn't completely remove the water spots.
so i had to resort to more abrasive polishing using a
Orange CCS pad and SIP
For finishing polish i went with 85RD and a blue 3M UltraFina UK pad
Linear Mode
