Polycharger Test Forum Information - Page 2

mg031 · 10-27-06, 11:13

I finally used it this Tuesday. I used Polycharger for sealants with both EX-P (the newer 2nd version) and Z2Pro.. applied it to my Titanium Silver 06 325i, EX-P on the passenger side and Z2Pro to the driver side. Initial application was easy though i rarely ever have trouble with applying sealants. Removal was easy with both as well. Visually both looked good initially but is hard to tell on silver. Now that a few days have passed..both sides are very very slick which i think Polycharger has helped with but i think it helped EX-P more than did Z2Pro as i know EX-P was never this slick.

It has started raining here in NJ today and both sides show very tiny water beads.. again small beads were something that i never experienced with exp but it's been awhile since i used it. The rain should last through tomorrow so i will recheck and update on how the slickness changes. I did the roof both sides with EX-P and Z2pro Un-Polycharged so i can have some sort of comparo.

Looking at both bottles with some leftover sealant as i type... The PCharger changed the EX-P from it's whitish color to a light green and Z2Pro slightly changed a bit lighter. EX-P is becoming thicker gel like almost.. the zaino is still liquidy. (I used about 4 doses polycharger for 2 ounces of EX-P and 2 doses for 1 ounce of Z2Pro).

mg031 · 10-27-06, 11:15

I also used PC H2o with Poorboy's Spray and Gloss and found it to help it quite a bit too. I used this on my fathers Black Camry and it's slickness was quite very nice.. will see how that holds up to the rain as well....got some Z6 to try next.

... wow i have a bunch of stuff to try this with.. i think next i will use it with either Acrylic Jett or Klasse SG for the Grey Camry this Sunday when the weather clears ... ok i already mixed up Acrylic Jett w. PC H2o.. mixed so easy..hope it goes on / removes just as easy. Will report back.

thom · 11-14-06, 05:43

i poly charger some sonax water based trim protectant.my side mirros real do bead and the droplets go flying off. sonax is a matte finisn the polycharger added the sligrst shine. good its fun to play with it.

thom · 11-14-06, 05:46

i poly charged a combo of ocw and carnuba jet with some quickshine. not bad and slick too. the water base is fun

PrinzII · 11-28-06, 07:03

I want to test this using 2 sealants in my arsenal. One is KSG. The other is Autoglym EPP.