Polishing Questions

[DennisH]

I just purchased this kit
1 Orange Pad- LC-76-2165VC
2 White Pad- LC-76-6165
1 Black Pad- LC-76-7165
2 Microfiber Towels- MDT-300
1 Snappy Clean Packet

Plus this pad.
1 Dual-Action 6.5" Blue Finessing Pad LC-76-536

I also purchased PB 2.5 and 1.0 polish.

I have a black car with minor swirls and spider webbing that is only driven on nice days and is garaged. My plan was to use my PC and use LC white pad and PB 2.5 then follow up with LC Black pad with PB 1.0. Then we are going to use AIO with the LC Blue pad before using the LSP. Is this the correct process or is the a better way to tackle this? Also the part numbers made me believe that these were Lake County pads but when I received them the package said Wolfgang, are these just repackage LC pads? I have never used any of the PB polishes, so any thing I need to watch out for?

The other polishes I have is Sonus SFX-1-2-3 and PS Paint Works Cleansing Lotion.

[kgb]

You might want to use the 2.5 with the orange pad and the 1 with the white pad AIO with the black pad and put on the finaly coat with the blue. I would actually say skip the AIO and just through on a final step though.

[Rollman]

I'm not real familiar with LC pads , when in doubt always start off with the least aggressive product and pads ,then make changes as you see fit . Poorboys is pretty fool proof when it comes to using it . I would go from polish to a sealant to a LSP but thats me

Happy Detailing