Rotary Usage

[ICANDY]

ah huh, I understand now why you pushing this Aussie Gold stuff so hard


I don't like glazes Matt, no clarity.
I'll stick to this high clarity carnauba instead:

[Moutee]

Originally Posted by ICANDY

Use a smaller pad. There is obviously too much grip on the pad. I use a 6" versus the notmal 8" when I experience that problem.

It may or may nto work for you but it's definately worth a shot, reducing friction via this method seems to work for me.

d.

The pads I use are 6".

[SVR]

Originally Posted by ICANDY

ah huh, I understand now why you pushing this Aussie Gold stuff so hard


I don't like glazes Matt, no clarity.
I'll stick to this high clarity carnauba instead:

]

Don't confuse Showroom glaze with 3M imperial hand glaze or other filler glaze
It's just a top quick detailer with sealant that just happens to enhance the finish every time you use it and last longer than some pure sealants
The clarity on my car from it is simply outstanding IMO

I've gone right away from waxes, won't have any in my shop from now on
Not saying your wrong or I'm right, we just have varying products, style's and opinions which I think is good.

Only reason I've promoted it so much is because it works brilliantly and craps all over all but one of the QD's that I have bought. All these so called great QD's like FK 425, UQD, CG's extreme slick, Zaino Z8 etc are like water compared to it and Driven's Concentrated QD
Especially in the slickness, shine,clarity, wetness and also that it is machine applyable and polishes and protects windows, wheels, interiors and more.

[rmzalbar]

I have a question about selecting a rotary machine.

Many (not all) of the higher-end rotaries I see people mention (dewalt etc) have variable speeds that START at 1000 RPM. What gives? Is it important for a rotary to be able to spin slower than 1000?

[JuneBug]

Check out Makita 9227, 600 rpm to start and you get the "slow start" feature, think of it as letting the clutch out slowly.

[White_07_G6_GT]

My thoughts after using a rotary for the first time this past weekend.

Don't be scared of it. If you start out at a lower RPM until you get the feel of it you will have more time to react to it trying pull you all over the place. It took me most of the hood to start to get comfortable so thats 4 passes over a pretty big hood. Using smaller 6" pads will help as well I found the 8" pad would drag me all over. Once you feel like your getting the hang of it just up the speed a bit. Each time you change surface I would lower the speed. I went back to about 800RPM when I started on the C pillars, doors bumpers etc each pass i upped the RPM a few 100.

It's not at all what I expected I thought I would spend the entire time scared to death that I was going to burn the paint. As long as you keep moving and watch your speed you will be fine. My Rotary has a trigger that operates like a throttle no the on off that the PC has. That makes it great for cutting in and picking up product.

Like anything in life your not born with experience that you get by doing so get out there and try it.

[zaxjax]

I have read all these pages several times. I also purchased my Makita several weeks ago. I finally broke it out. I washed my DD F-150 and went to town. My experience was fantastic with a white polishing pad and slow speeds. I have a new truck. Yes, I burned a small spot on the tailgate. It's not as bad as I would have thought. I will keep practicing, but I'm not scared after all the help from my fellow Autopians.