How often to use UDM

[derek collier]

it was back in october when i last did my car. it is getting about that time to need it again due to the damn Oklahoma ice storms. just one question though, how often is too often?

[Accumulator]

derek collier- This is one of those questions that nobody can really answer, and no, that's not a blow-off

Generally speaking, machines like the UDM are pretty gentle, and most paints can easily withstand dozens of gentle polishings.

BUT...if you're effecting serious, complete correction, where you polish the clear down to where it's level with the bottom of deepish scratches, then you're taking off a lot of clear no matter what machine/technique you use.

If you remove more than 0.03-0.05 of a mil (that's 0.0003-5", which isn't much) then you'll probably precipitate clearcoat failure, and you can have other issues too, like fading of the colorcoat under the remaining clear.

So my advice is to polish it as little/gently as possible, as infrequently as possible, while still doing it aggressively/often enough that your vehicle looks OK to you. Which sorta boils down to not marring it in the first place, well.. as best you can in the real world.

[Carbon Blue]

Id say polish the car once every 6 months.