Detail: Keyed 07' GT (too many pictures)

[ReLoaDeD BuLLiT]

Wheels/wheel wells:

Spray with wheel gel
Spray wheel wells with degreaser
Scrub wheels with short handle brush/optimum rinse soap
Scrub wheel wells with long handle brush/degreaser/soap
Poorboy's wheel wax/wipe off with micro fiber
Dress wheel wells with CG barebones

Paint:

Pressure washed entire car
Wash w/2 bucket method w/grit guard
Optimum Rinse car wash soap w/foam canon
wipe down with chamois
Applied Megs M105 via yellow diamond cut pad to entire vehicle via rotary @1500 rpm
Applied Menz IP via Orange CCS pad to entire vehicle via rotary @ 1500 rpm
Applied Poorboys EX-P Sealant by hand to entire vehicle
Appled Danase Wet Glade by hand to entire vehicle
Applied Pinnacle Souveran Wax to entire vehicle by hand
Wiped clean w/ microfiber

Problem Areas(scratches/scuffs):

Applied touch up paint 4 hours prior on deep scratches
Wetsand w/3m 2000 grit w/soap/water
Dried w/ microfiber and checked work
Applied Megs M105 compound via yellow diamond cut pad w/rotary@1500
Applied IP orange ccs pad w/rotary@1500
Wiped clean with microfiber


Interior:
Wiped down entire interior w/303
Pressure washed mats and doused w/ woolite 1:8
Lathered seats in woolite 1:8
Protected seats w/pinnacle Leather care conditioner
Mr. Clean Magic eraser on interior panels with dark scuffs
Steamed all carpets w/ extractor w/woolite

Engine Bay:
Degreased with 1:3 Poor boys degreaser
Sprayed Megs Hot Tire Foam over entire bay
Wiped 303 over spotted areas by hand

Car was keyed front to back on both sides...poor kid

Here's a link to an html with all the pics because there's way too many to list here:

Untitled Document

Here's a video of it :

YouTube - Detail 07 Mustang GT (keyed)

[BigAl3]

nice job once again! the person who keyed it should be shot...

[ReLoaDeD BuLLiT]

it was supposedly no one he knew but from the looks of it (in person) it was an ex

[ReLoaDeD BuLLiT]

video added

[detaildoc]

Dude! Your work is incredible man. IMO, you are quickly becoming one of the most skilled detailer in this site, even though you recently started doing this (am I correct?). BTW, I love the DWG + Souveran combo; I recently started using this combo myself and it is amazing.

[ReLoaDeD BuLLiT]

Originally Posted by detaildoc

Dude! Your work is incredible man. IMO, you are quickly becoming one of the most skilled detailer in this site, even though you recently started doing this (am I correct?). BTW, I love the DWG + Souveran combo; I recently started using this combo myself and it is amazing.

thank you so much man...I idolized (and still do) your work along with rickrack's and a few others on here and it totally inspired me to do well, and I've learned so much and owe it all to this site. I just started in January roughly (semi-pro) detailing, and I've learned so much since then. Means a lot to hear something like that from a skilled detailer like yourself.

[detaildoc]

Originally Posted by ReLoaDeD BuLLiT

thank you so much man...I idolized (and still do) your work along with rickrack's and a few others on here and it totally inspired me to do well, and I've learned so much and owe it all to this site. I just started in January roughly (semi-pro) detailing, and I've learned so much since then. Means a lot to hear something like that from a skilled detailer like yourself.

Thanks! I'm not worthy, I'm not worthy! One huge difference though between you and I is, I don't dare touch a rotary yet (though I am heading that way), while you seem to have gotten the hang of it quickly. From the pics, it seems you using the Flex rotary, if so, which model? How do you like it? Do you have any other rotaries, and if so which ones, and which one is your favorite?

[ReLoaDeD BuLLiT]

Originally Posted by detaildoc

Thanks! I'm not worthy, I'm not worthy! One huge difference though between you and I is, I don't dare touch a rotary yet (though I am heading that way), while you seem to have gotten the hang of it quickly. From the pics, it seems you using the Flex rotary, if so, which model? How do you like it? Do you have any other rotaries, and if so which ones, and which one is your favorite?

I'm just using the cheap-*** harbor freight rotary lol...works WONDERS man...well-worth the 30 bucks I paid for it hahahaha.

[BuffMe]

Awesome job, once again.

However, what are you using on those (p)leather seats? It looks really streaky/splotchy/oily in the pics?

[ReLoaDeD BuLLiT]

Originally Posted by BuffMe

Awesome job, once again.

However, what are you using on those (p)leather seats? It looks really streaky/splotchy/oily in the pics?

lol...those were wiped down once more before finishing...that was sweat you saw from my 100 degree garage i did it in.

[drew.haynes]

Stunning man, stunning. I've been itching to get a Makita lately, but at 6 times the cost of your rotary, do you think I should just opt for the same one as you for now? Does it bog down or do anything goofy?

[ReLoaDeD BuLLiT]

Originally Posted by drew.haynes

Stunning man, stunning. I've been itching to get a Makita lately, but at 6 times the cost of your rotary, do you think I should just opt for the same one as you for now? Does it bog down or do anything goofy?

mine doesn't do anything un-ordinary man...been working great and I've done about 6 cars with it now. I say it's worth a shot!