Clear Bra/Paint Protection for Unusual Front End?

[Young Scholar]

Hey guys,

If I decide to keep the Jeep I'm going to be repainting the front bumper and grille, it's pitted from road debris . After paint I would like some protection such as a clear bra, but I doubt it will work on such an surface (angular and many pieces). Is this possible? Is there any special clear you can request at the bodyshop?

Here is a picture of the front end for reference ( yes I know is SO dirty, this was taken just after winter).

[themightytimmah]

Someone out there can definitely hook you up with a clear bra. It might cost a little extra, but a good shop will be able to custom fit you one.

[VroomVroom]

Totally agreed. Some shops may even "thank" you with a discount as well if they don't already have templates for your vehicle. The key for your vehicle, along with the quality of the film cut, will be the installation...it'll be a bit painstaking to prevent lifting, and I imagine they'll use multiple pieces. Also - probably obvious, but just in case - make sure that fresh paint has fully cured before you have the film applied.

[tyymm]

The 3m clear bra usually comes in widest at around 24 inches.... you might want to try buying bulk film online and just applying it yourself.