First time Klasse user question

Tone · 09-18-01, 03:06

How soon after applying AIO should the SG be applied?

BradE · 09-18-01, 03:26

As soon as you wipe off the AIO, SG can be applied. You do not need to wait, just wipe off the AIO and then apply your SG.

Steve9185 · 09-18-01, 03:26

I'd highly reccomend searching the archives for the answer to your question. However, typically you want to wait at least 24 hours before applying a coat of KSG.

grandprix · 09-18-01, 04:23

You can apply SG right after you use AIO.

I would wait 24 hours before I apply a second coat of SG.

permalink · 09-18-01, 04:40

You can apply the Glaze once you are done with your All-In-One application.

Steve9185 · 09-18-01, 07:20

You guys might want to take a look @ this thread. It seems that waiting 24+ hours is better to allow curing time for the AIO and KSG.

http://216.147.22.29/forum/showthrea...light=Polymers

joed1228 · 09-19-01, 10:50

I was under the impression the Klasse Glaze is the only product that some people are in the 24 hour debate over.

I am sure once you apply the All-In-One you can apply your first layer of Glaze, after that layer you may want to wait, I don't and I have no problems, the finish comes out looking top notch, I am on my 4th layer and the 5th will be on this afternoon.

hook · 09-19-01, 08:12

I've been waiting at least 24 hours with both AIO and KSG. Exception is if I do 2 passes with AIO ("layers" isn't right), I'll do the second right after the first, since the first is removed anyway.

Necessary? Who knows, but I've noticed a difference when I wait.

blue skies,
Andy

YoSteve · 09-20-01, 12:06