opti seal over menzerna 106ff

[Dairyman]

i was thking about finishing off with 106ff by rotary then topping with souvern (possibly a machine glaze in between the 2)

would i get better results to not glaze or wax and just use opti seal as my lsp

does opti seal finish down better than 106ff or will it make the finish look worse if used over 106ff?

thanks

[Anthony Orosco]

Originally Posted by Dairyman

i was thking about finishing off with 106ff by rotary then topping with souvern (possibly a machine glaze in between the 2)

would i get better results to not glaze or wax and just use opti seal as my lsp

does opti seal finish down better than 106ff or will it make the finish look worse if used over 106ff?

thanks

Perhaps you're thinking of Poli-Seal? Opti-Seal is Optimum's wipe on/walk away sealant and is not yet released.

Your best bet would be to use the Menzerna product and see how it looks. My guess is that it will look great so should then be done with the polishing and ready to seal. You can then apply the Pinnacle wax.

As for glazes.....I personally don't care for them. Too much work and headache.

Anthony