-
best water sheeting wax
by , 04-06-13 at 03:05[QUOTE=tonipieleanu;1534429]I find Opti-Seal + OID to sheet very well with minimal residual water.
The water sheeting effect is usually done via running an open hose over the paint in a manner to flush the water off the paint. Sadly, the rain water does don’t have enough pressure to cause this effect to occur naturally.
Wolf's Body Wrap beads extremely well, but is prone to water-spots due to all the beading.[/QUOTE]
0 Comments
-
Vibrations (Machine Polishers)
by , 03-08-13 at 12:36 (New posts (Nov 2011) on Autopia Detailing Wiki)Exposure to vibration
Vibration can cause long-term painful damage to your hands and fingers. It has been proven that operators face significant risk of muscle, joint and nerve damage caused by the inherent vibration of power tools. By reducing the amount of vibration you can reduce muscle and joint fatigue as well as the potential risk for permanent damage, as described in ISO 5349-1:2001- Mechanical vibration -- Measurement and evaluation of human exposure to hand-transmitted ... -
Vibrations (Machine Polishers)
by , 03-08-13 at 12:35 (New posts (Nov 2011) on Autopia Detailing Wiki)A Dual action machine (random elliptical orbit ( OPM) is one that has two controlled components of the backing plate / pad; orbiting around a centre spindle, while the baking plate / pad freely spins on its own axis. The backing plate mounting is off-centre, as the drive rotates centrifugal force moves the backing plate in an elliptical motion (due to its 5/16-inch offset) to balance this motion a counter weight is fitted to counteract machine vibration
...
-
Vibrations (Machine Polishers)
by , 03-08-13 at 12:31 (New posts (Nov 2011) on Autopia Detailing Wiki)A Dual action machine (random elliptical orbit ( OPM) is one that has two controlled components of the backing plate / pad; orbiting around a centre spindle, while the baking plate / pad freely spins on its own axis. The backing plate mounting is off-centre, as the drive rotates centrifugal force moves the backing plate in an elliptical motion (due to its 5/16-inch offset) to balance this motion a counter weight is fitted to counteract machine vibration
...





First



Recent Comments
