Tronix, I would also highly recommend an edge green wool pad. It is my all purpose
wool cutting pad along with the presta 1500 polish. Remeber to use very little of the SIP with a wool pad, about half of any other polish.
Here is Bret showing the proper amount of SIP to use with wool:
We were working on a
black Porsche 928 that day and the SIP w/ the black wool did not have enough cut. We had to go to Strada 1000 polish (what Bret calls liquid sandpaper
) to cut all of the defects out.
I always find myself going back to a foam pad with ZPC or 106ff after the wool to clean anything up. I used the blue wool/ZPC on a sage green Lexus IS350 which has a softer clear and still had to follow with foam. The holograms where very minor out in the sun, but still needed cleaned up.