Autopia.org - View Single Post

jmillican · 05-07-07, 03:53

If I understand your problem correctly, you have been able to drill a 1/8th hole into the head of the screw. Well tap into this hole with the next larger drill bit that you own and continue this process until the remaining portion of the screw is so thin that it can be pried out or pulled out with a needle nose.

05-07-07, 03:53	#5 (permalink)
jmillican Registered User jmillican is offline Join Date: Jun 2006 Posts: 49	Re: Help, I stripped a phillips head screw If I understand your problem correctly, you have been able to drill a 1/8th hole into the head of the screw. Well tap into this hole with the next larger drill bit that you own and continue this process until the remaining portion of the screw is so thin that it can be pried out or pulled out with a needle nose.