Quote:
|
Originally Posted by Islander
Tried a small screw extractor, but the hole (1/8 bit) I was able to drill was to small & couldn't get the extractor to bite.
Went to a 1/4 titanium bit to drill it out, and the screw was appaantly harder than the bit.
..any ideas?
Thanx!
|
If the 1/8 hole is too small for the extractor, you've got to drill a bigger hole. What size is the screw that is stripped out.....? (you might have had a dull bit last time around) Screws aren't as hard as drill bits so get back and drill a hole in that bugger......
Would drilling off the head do any damage to the mounting structure....?