Tring to put a new pair of speakers in the front doors of my Azera. I can't believe how tight one of the screws for the door panel is in there. Well after 2 tries I strippped the head, desite being careful not to do so.
Liquid Wrench - not much help.
Tried a small screw extractor, but the hole (1/8 bit) I was able to drill was to small & couldn't get the extractor to bite.
Went to a 1/4 titanium bit to drill it out, and the screw was appaantly harder than the bit.
Naturally, its a real small area so a dremmel cut off wheel can't fit in
I'm now totally frustrated...any ideas?
Thanx!