[DieselMDX]

Originally Posted by MoeMistry

As we all know, the prep work is the most important step. Claying is pretty much simple; use the most gentle clay to get the paint as smooth and quiet as possible. Then you can assess do what degree the finish needs correction. If all the prep work is done to your specs, then here my Zymol routine. You HD medium sections at a time; I do the whole hood, and the front bumper and fenders. It's ideal to be working indoors at a temp. no lower than about 60-65. I put about a quarter sized dollup of HD on the Zymol pre-wax applicator and rub in a linear motion. You apply a medium amount of pressure until most of the HD is worked into the paint. I then remove HD using the Zymol Terry. Once the whole car is HD Cleansed, I apply the wax. If I use Destiny, I take about a peanut size amount and warm it in my palms. My palms become oily and I then massage it into the finish. Once again, in linear motion. Don't worry about coverying all the panel. Even if there are areas that are not greasy, rather glossy, when you wipe off the wax, you even things out. I let Destiny sit for about 2 min. I then gently wipe off the wax letting the microfiber do all the work. After about a 1/2 hour I Field Glaze the car and that's it. You can apply another layer of wax in about 6 hours. By the 3rd layer, the finish takes on a whole new look and level of protection. If the car is garaged and properly maintained, Destiny should last about 4-6 months. Hope this helps.

I was looking at pics of Paul Dalton use his Royal with a applicator he stated to me on detailing world that using a app is a better way to apply estate. I have ital but I am not sure how i should apply it