Quote:
|
Originally Posted by AL-53
What was wrong with the 3.01 IP..I have it and used it on some ruff scratches..and it worked great..and finished out LSP ready with a white CCS pad....I added a drop of OP to it so to extend the work time a bit..no dusting either...it cut fast and left a nice gloss...I did go over the paint with PO85RD after..but the 3.01 did finish out nice ...
Al |
Nothing was wrong with it. From what I was reading & what
menzerna told me, I would see no real improvment of the 3.01 over standard IP if used properly. The ceramiclear polishes all seem to contain extra lubrication from slightly longer working time, which is simply what 3.01 is. To get the same or similar results, Jeff mentioned that spraying some water on the panel would extend the use of the polish and allow me to properly finish it down. IIRC Dave KG has mentioned this a few times as the "slow cut" method.
Going by
menzerna's recommendation, it seems as if powergloss was a better option if I was looking at more cut over standard IP.
I would highly recommend people to give Jeff a call @
menzerna USA. What he has to say about the ceramiclear vs non cermiclear polishes is very enlightening and pretty much supported by what I've been seeing the distributors in europe also mention.
Dave