Quote:
|
Originally Posted by rydawg
You are right....I have been doing months of research on this also and watched and asked the pros which pads they use and they all say LC or megs polish pads. LC cutting pad via pc or megs polish pad via rotory. Look at polishedbliss.uk.com, cleanyourcar, and the head users Davekg, cupraclark, wxt51, etc... Those guys get way beyond excellent results with all the menzerna polishes.
Menzerna polishes are a little finicky and with the right pad they will scream gloss. I have been playing a lot with the 106ff, 85rd, 3.01, etc... Also on the rotory anything above the polish pad is overkill.
Good post Justin...I like this one! |
Speaking of which, I just found out that my local paint shop carried some of the
meguiar's softbuff 6.5" pads, so I purchased one of the polishing pads and will be using it for this weekend's detail on a subaru forester
The 5"
LC CCS danase pads work fine for my car as it has many small angled panels, but for something as large as a forester, I needed a larger pad.
Also looked at the megs burgundy cutting pad. It was softer than I thought it would be, so I think I might be picking one of those up as well if I decide to use powergloss.
Dave