Quote:
|
Originally Posted by 01bluecls
I read through the thread given and maybe I might have missed it, but I dont see where DaveKG used soley a Menzerna "orange polishing pad and 106FF" to remove the defects he presented. He seemed to use IP the white cutting pad, then finished with 106FF. Almost all the defects were removed with IP. |
Right, I posted that link to characterize the
Menzerna pads. As mentioned, it is stiffer than a white LC pad but not as stiff as an LC orange, which places it right in the region of the green LC pad I mentioned before. Plus, if you look at
Menzerna's site the density, stiffness ratings given to that pad roughly correspond to the green LC.
Those swirls in DaveKG's thread were inflicted by steel wool . . . I'd be very surprised if
PO106FF and the orange pad could actually remove those marks. The black vehicle posted above merely had normal day to day swirling.
FYI, the IP that DaveKG mentions is not the normal IP that is purchased in the states. It is the ceramiclear version which I am told has 2x the normal amount of abrasives as the IP currently found here.
Dave