Autopia.org - View Single Post - Epoxy-Sheild Floor Installed this weekend

BJ007 · 03-05-07, 02:37

A few updates...

The clear coat went on this afternoon. No hiccups in the process, goes down a lot quicker than the base coat. It can be a bit difficult to see if you miss a spot, since it is clear. I recommend hanging a light from the ceiling about 2 feet from the ground and using that to be your gauge. I also used about half of the non-slip additive that was included with the kit.

Side note - a friend used this same system and said that he had good longevity with the product because his prep work was solid. He also cut cardboard strips for your tires to roll onto during the first month that the floor is down. Pics to follow perhaps tomorrow.

03-05-07, 02:37	#84 (permalink)
BJ007 Registered User BJ007 is offline Join Date: Sep 2005 Location: Phoenix, AZ Posts: 46	Re: Epoxy-Sheild Floor Installed this weekend A few updates... The clear coat went on this afternoon. No hiccups in the process, goes down a lot quicker than the base coat. It can be a bit difficult to see if you miss a spot, since it is clear. I recommend hanging a light from the ceiling about 2 feet from the ground and using that to be your gauge. I also used about half of the non-slip additive that was included with the kit. Side note - a friend used this same system and said that he had good longevity with the product because his prep work was solid. He also cut cardboard strips for your tires to roll onto during the first month that the floor is down. Pics to follow perhaps tomorrow.