| 02 SC Frontier- Combining what the others have posted, you need to use the right product on the right pad. A 4" cutting/light cutting pad on a PC oughta do it with the appropriate product (I'd go with Hi-Temp EC or HC, mixing the EC with something like OCP or the 1Z Ultra that I used).
I wouldn't use a wool pad, not much more cut but a *lot* more not-so-micro marring. Stick with foam and use 4" for correction.
FWIW, I've spent literally *hours* on a single panel doing correction via PC/Cyclo. It's not like you can always do the job with just a few passes the way you can with a rotary. But the right pad/product combo will at least get the job done (in most cases) if you put the time in. |