Autopia.org - View Single Post

Djmigs · 10-05-06, 10:54

Fdizzle- wont add to much since gearhead has spoken..but you must be more aware with the unit meaning more then a pc and also and stay below 1200 rpm until then move up, also try the burn test once is always recommended, it will damage your pad but at least you will know what to expect and know how far it take to burn.....

again it sounds like you be reading and getting good advice from other power hitter members here, just like you said start with junk hoods and work yourself up....hitachi is the same if not simular as the makita but with a five year warranty plus a tad lighter.....

by the way i thought i might save you some buxs and link you to this site were you can get the hitachi at cost...

hitachi sp18
by the way i was informed buy the Sensei Chris aka Spoiledman

10-05-06, 10:54	#5 (permalink)
Djmigs Certified C. & Mc P.S.N Djmigs is offline Join Date: Oct 2005 Location: Cali (Westcoast) Posts: 468	Fdizzle- wont add to much since gearhead has spoken..but you must be more aware with the unit meaning more then a pc and also and stay below 1200 rpm until then move up, also try the burn test once is always recommended, it will damage your pad but at least you will know what to expect and know how far it take to burn..... again it sounds like you be reading and getting good advice from other power hitter members here, just like you said start with junk hoods and work yourself up....hitachi is the same if not simular as the makita but with a five year warranty plus a tad lighter..... by the way i thought i might save you some buxs and link you to this site were you can get the hitachi at cost... hitachi sp18 by the way i was informed buy the Sensei Chris aka Spoiledman __________________ Miguel Expect the worse, and you wont be surprised!!! Last edited by Djmigs : 10-05-06 at 12:13.