Prima Amigo Hand Glaze
A non-abbrassive filling product this time, so without the abbrassive to deal with the swilrs, this product was going to rely on the fillers... This made it very easy to use.
Before:
This product was worked in with circular motions then straight lines with medium pressure, given about two minutes per hit to work.
Results after three hits:
Results after five hits:
This product did an excellent job of dealing with hte light swirls but as expected struggled a little with the deeper scratches. However, for cars with light swilrs, this would be an ideal fast, and easy to use glaze product for masking the swilrs effectively. It also left a very nice glossy finish, I was impressed with this product and can see me ordering some in the near future to use as a finishing glaze.
Menzerna Final Polish II
A different take on swirl removal now... abbrassiv only, no fillers... I was expecting this to really struggle, relying only on abbrassives which by hand are very difficult to get very good results from. But it did prove me wrong...
Before:
As before, the product was worked in circular motion and straight lines, about five minutes pre hit this time though to try to fully break the product down... tough going, but generated results:
Results after three hits:
Results after five hits:
This was tough going and tiring, but it dealt very nicely with light swilrs and did an admirable job by hand on the heavier scratches... If you have arms like Arnie, this could be done on a full car but there are easier products out there. For me, Menzerna is best suited to the machine, but can work by hand.