Autopia.org - View Single Post

blytes · 08-27-06, 11:09

I recently purchased a PC7424 and need some advice. I have a 02' black nissan se-r spec v with a lot of swirls. I plan to first wash with Meguiars NXT, clay and then riinse. Now comes the PC part. I decided on Menzerna, since people tend to say it is great on black. Should I use Mezerna IP with an orange pad, Menzerna FPII with a white pad, and then the Finishing Touch Glaze with a Red pad? Also, which speeds should I use for each menzerna product?
I read peple saying to ease it in with 3 and then step the PC to 6, but should I do that for all the menzerna steps?

I have:
2 7.5" Lake Counrty Orange Power Pads
2 7.5" Lake Counrty Red Polishing Pads
1 6.5" Lake Counrty White Pad
Menzerna Intensive Polish
Menzerna Final Polish II
Menzerna Finishing Touch Glaze

08-27-06, 11:09	#1 (permalink)
blytes Registered User blytes is offline Join Date: Aug 2006 Posts: 5	PC7424 and Menzerna Help I recently purchased a PC7424 and need some advice. I have a 02' black nissan se-r spec v with a lot of swirls. I plan to first wash with Meguiars NXT, clay and then riinse. Now comes the PC part. I decided on Menzerna, since people tend to say it is great on black. Should I use Mezerna IP with an orange pad, Menzerna FPII with a white pad, and then the Finishing Touch Glaze with a Red pad? Also, which speeds should I use for each menzerna product? I read peple saying to ease it in with 3 and then step the PC to 6, but should I do that for all the menzerna steps? I have: 2 7.5" Lake Counrty Orange Power Pads 2 7.5" Lake Counrty Red Polishing Pads 1 6.5" Lake Counrty White Pad Menzerna Intensive Polish Menzerna Final Polish II Menzerna Finishing Touch Glaze