ok i my second time using the pc and i ruined the fender!!!! i clayed the car with mothers clay and detailer, and all was ok untill i stepped away from the car and saw a slight film in certain areas. so i used a fresh towel and some meguires
Final inspection and it removed the film, well i proceded to apply the smr with the yellow pad on my black(blue pearl) accord. i started by spreading the smr over the fender and then buffing for about 45 seconds on 3.5 speed, i then raised the speed to 5 i think and buffed untill al was left was a oily looking haze on the fender, i removed the haze with a towel and it came off very easy but it left more swirls then were there to begin with, but this time the swirls were in a smaller pattern. well i panicked i got a fresh white (less aggressive) and buffed in the same maner but this time with #9 2.0 and it removed about half but the fender looks like isht to be honest. and i am disgusted, i dont now what i did wrong please some one help i am sure it is my technique b/c no one else has had a negative pc experiance that i have seen