Quote:
|
Originally Posted by roadmaster_Tx
Great job!
I did have one question tho, did u re-clear the whole bumper? if so what grit sand paper did u sand the rest of the bumper down with? 1000?
And this was done using a spray can? or a actual spray gun with compressor?
thanks
|
I didn't re-clear the entire bumper, just the top piece above the chrome trim because when I did the work on the passenger side I masked off the other half of the bumper which made a tape line. When I wetsanded the side I did the repair on, I just continued over to the other side and sanded down the tape line so it wasn't raised up. I used 2000 grit wetsand paper on both sides (so the clear would stick) and laid down the 2 coats of clear 10 minutes between each coat. With the clear laid over both sides, the tape line disappeared.
I did all this with Spray bombs.