Ok... I'm soar as hell... damn that manual labor and stuff...
Here are some links to pics. I made them links as the images I sized down to 1024x786 and in case there are people here with 800x600...
Clean Floor
First Coat Down
Secomd Coat Down - Step
Second Coat Down - Threshold
Second Coat Down - Main Area
The first coat I tried to go thick, but I wasn't sure If I was going to have enough. So I'm sure I held back a bit. The second coat went on so easily... like melted butter. I really applied a nice thick coat that second time. I used just over three gallons between the two coats for 375 sq ft... (small 2 car garage)
I also had a ton of chips I used a lot about 1.5 bags I really like the chips because they seem to hide the imperfections in the concrete rather well. Man I cant wait till noon so I can walk in there and feel the new floor.
Thanks goes out to everyone for this awesome thread. It helped me a lot, I know I was vigilant when it came to prep... hard to tell in that first pic but I cleaned the crap out of that floor. Hopefully with the 2 thick coats, and the fact that I don't wrench and I only park a Wrangler in there -- I hope I wont have too many problems.
Ill post updates if you guys want as well.
-Matt