Autopia.org - View Single Post - Car full of holograms/swirls.......induced by body shop ;/

Accumulator · 07-11-05, 03:28

Yeah, some stuff just takes a rotary in the right hands. Often though, you can remove hologams with the PC; it's the really *awful* rotary-swirls that are beyond this sort of fix.

I've been able to do some pretty good correction on Mazda clear using the PC, but only with 4" pads and products like 3M PI-III RC (pn 05933). Anything milder (and also 6.5" pads) was *too* mild. I did follow the RC with PI-III MG (pn 05937), but it was looking almost ready-to-wax after just the RC. Watch for differences in hardness between the original Mazda clear and the new stuff

But if you can get GSRStilez to work on it, that'd be a no-brainer

07-11-05, 03:28	#8 (permalink)
Accumulator Practical Perfectionist Accumulator is offline Join Date: Sep 2002 Location: NE Ohio Posts: 20,795	Yeah, some stuff just takes a rotary in the right hands. Often though, you can remove hologams with the PC; it's the really awful rotary-swirls that are beyond this sort of fix. I've been able to do some pretty good correction on Mazda clear using the PC, but only with 4" pads and products like 3M PI-III RC (pn 05933). Anything milder (and also 6.5" pads) was too mild. I did follow the RC with PI-III MG (pn 05937), but it was looking almost ready-to-wax after just the RC. Watch for differences in hardness between the original Mazda clear and the new stuff But if you can get GSRStilez to work on it, that'd be a no-brainer