Autopia.org - View Single Post - Cobra Wet Sand Gone Wrong: Will PC + SSR Fix

6']['9 · 05-15-05, 08:15

id go with some 3m RC by hand a couple of times and it should take care of it if you do it enough. If that sanding mark doesnt come out you can try spot wetsanding it with something like 2500 or 3000 grit then buff it out by hand. Its not easy to do it by hand but it can be done. But if you have a rotory or pc you can still do the 3m then follow with something like IP or OCP then FP or FPII AIO and then finish with what ever you want. good luck

05-15-05, 08:15	#6 (permalink)
6']['9 Registered User 6']['9 is offline Join Date: Dec 2003 Location: San Antonio Posts: 1,183	id go with some 3m RC by hand a couple of times and it should take care of it if you do it enough. If that sanding mark doesnt come out you can try spot wetsanding it with something like 2500 or 3000 grit then buff it out by hand. Its not easy to do it by hand but it can be done. But if you have a rotory or pc you can still do the 3m then follow with something like IP or OCP then FP or FPII AIO and then finish with what ever you want. good luck __________________ Jay