[GearHead_1]

The story that I've received from three different installers is that the doors are difficult to adust properly and they have the ability to bend the panels of the door when closed. I'm sure there must be a correct way to adjust these that's why I made mention of the learning curve. I believe that most people don't need or just don't see the benefit of this system so the adoption has been slow. I've actually decided to install a jackshaft opener (more of a commercial product) where I had intended to put the I-Drive opener. This setup puts the motor at the side of the door near the top of the door. I'm sure it isn't as slick of an installation but in it leaves the ceiling open and that's what I'm shooting for. I'm putting a lift in this garage and wanted to have a high lift door system with an open center. It should be installed in the next couple of weeks. I'll have a better opinion then. I'm putting High Lift belt drive openers in the other two bays. I really wanted to use the I-Drive but just couldn't find anyone that wanted to install and stand behind it for me.