[Deanski]

Multimut:

Congrats on getting a clear bra! Best investment made!

Now, as for maintaining, you can use 303 OR Zaino, really does not matter as the film is quite forgiving so long as you do not rub hard or use abrasives.

Where it ends is always difficult to maintain as wax does get trapped. I've used a brush to remove the wax, or use painters tape to cover the end point.

I've used 303, Megs Plastix, Zaino, Souveran Paste wax and other items over it with no ill effects.

It's cleaning it that you run into problems. Bugs, tar etc get stuck, but if it was treated with 303 or Zaino, a good QD will remove it with a MF towel and VERY LIGHT pressure. Let whatever you use to clean it off soak it so you do not rub. Film is easy to scratch with wrong towels or hard rubbing even WITH a MF.

You are correct that during installation, they remove all wax, polish, oils etc normally with 3M Prepsol 70 before they attach the film to ensure a strong bond of the film to the finish.

Good luck with the clear bra.

Regards,
Deanski