[clint]

I have it on my floor and it's holding fast after eight months or more- I don't remember..

I cleaned the heck out of the bare concrete first and used muratic acid to etch after that..

Then I put the epoxy down. You can forget washing the pan and rollers, and you have to be up for doing the whole deal at once, but since it's a floor then that's not too difficult.

The stuff I got was pretty old stock from home depot, and was on sale- It was a mother to mix the pigmented part in its can- it had seperated big time and I had to use a drill stirrer. However it mixed on up after a while and is down there just fine. Now oil washes out with soap and hose instead of soaking into the slab..