[dsms]

Next, Mystic White SL63 (Designo) finished this morning...

Wash:
Foam w/ citrus wash clear
2 bucket hand wash w/ Gloss-It gloss shampoo
Wheel cleaned with Gloss-It wheel gel 4:1
Tires cleaned with ARO + Tarminator
Clayed w/ Gloss-It puprle aggressive clay + ONR lube

Correction:
Gloss-It evolution cut w/ Flex DA
Menzerna PO85rd w/ EVP pad prime at 1500,1100 rpm on Flex rotary

LSP:
Jeff Werkstat Acrylic x1 (very short on time)
Gloss-It Concourso Gloss x2 by hand
Windows treated w Glass Polymer as well
Tires treated w/ Gloss-It tire gloss x3
Wheel sealed w/ Rejex
Trim dressed with Gloss-It TRV

Interior:
P & S express interior cleaner
Gloss-it satin leather polish
Folex on carpets
Gloss-It TRV on plastic door sills
OPT spray wax on jambs
Lusso Oro wax on wood trim for a little more shine

Before:



Wheels before



GI wheel gel hangin' out for a minute and then agitated with various brushes



Let the foam sit for about 5 minutes before rinsing off and beginning the 2 bucket hand wash.. the lower panels were pre-treated with Tardis as a lot of particles landed on the paint (this car is daily driven to New york city)



Clayed using GI agressive purple clay

Followed up with 2 IPA wipedowns to prep the Finish for polishing. Even if all prior LSP is stripped off doing a thorough IPA or prep-sol wipedown is very important, especially if you use a clay lube with glossing agents or protection in it



The finish was very lightly swirled and extremely hard to capture defect on camera due to the flake, the clear was rock hard.

Jeweling 85rd at 1100rpm w/ GI EVP pad prime