Autopia.org - View Single Post - Meguiar's #4 or #84 for extreme fiberglass oxidation

Greg Nichols · 04-29-09, 11:30

I strongly sugggest that if the boat is very bad (chalky) that you use agressive sanding working your way down to say 1500grit then break out the polish. Compounding a boat that is bad takes more time than, wet sanding it............every experience I have had, its faster.

Cheers,
GREG

04-29-09, 11:30	#7 (permalink)
Greg Nichols Zamboni for Paint Greg Nichols is offline Join Date: May 2006 Location: Logan Utah Posts: 1,135	Re: Meguiar's #4 or #84 for extreme fiberglass oxidation I strongly sugggest that if the boat is very bad (chalky) that you use agressive sanding working your way down to say 1500grit then break out the polish. Compounding a boat that is bad takes more time than, wet sanding it............every experience I have had, its faster. Cheers, GREG __________________ Reflections Detailing of Utah "Detailing for the discerning owner"