Autopia.org - View Single Post

WSUcommuter · 04-08-09, 07:05

This is a boat detail I did as a present for my girlfriend's dad over a year ago. Process was done via PC since I don't have a Cyclo or Rotary.

I used the Meguiar's fiberglass restoration kit primarily. Process was:

1) wash/dry
2) wet sand all blue exterior surfaces
3) wash/dry
4) #49 Oxidation Remover x2
5) #45 Polish x3
6) #56 Pure Wax

I didn't take many photos as my primary concern was working the PC for hours on end. I estimated approximately 16 hours total for the exterior. The interior will have to be a present for this coming Father's Day

I've done a few Sea Doo details as well but never snapped any photos. For the next boat I do (if ever again, ha) I will definitely need more machine power!

04-08-09, 07:05	#1 (permalink)
WSUcommuter Addicted WSUcommuter is offline Join Date: Jan 2005 Location: Ohio Posts: 476 Contact:	Boat detail: 1993 Armada open bow This is a boat detail I did as a present for my girlfriend's dad over a year ago. Process was done via PC since I don't have a Cyclo or Rotary. I used the Meguiar's fiberglass restoration kit primarily. Process was: 1) wash/dry 2) wet sand all blue exterior surfaces 3) wash/dry 4) #49 Oxidation Remover x2 5) #45 Polish x3 6) #56 Pure Wax I didn't take many photos as my primary concern was working the PC for hours on end. I estimated approximately 16 hours total for the exterior. The interior will have to be a present for this coming Father's Day I've done a few Sea Doo details as well but never snapped any photos. For the next boat I do (if ever again, ha) I will definitely need more machine power! __________________ 2002 Mustang GT