[JoshVette]

Okay, so now that it's all decontaminated, I will need to get the goo gone or 3M adhesive remover and wipe off all the areas of left over adhesive from where the plastic was on the paint. I forgot to document this part but lets just say there was plenty of areas to wipe down.

Now that I think I'm ready to seal it all I get hit with a bad rain storm, so I hold off on the sealant till the weather is a little better and not getting 1/3 of the car wet....


So onto the interior.

I'm very gentle with the plastics on the inside as some of them are fascend to the inner parts of the door panels and seats so I do not want to put any kinds of marks or tears in the fresh leather and plastic.

First off the cautiously remove the stick so it does not tear and the owner can have his "proof of purchase".



As you can see there was plenty of adhesive to remove so time to pull out the goo gone again.

Then onto the door. Next time I think I would start with the back seats and work my way to the front incase I bump anything with my shoes or what have you.
















Now for the optional "GTR logo" mats.





Next up to finish off the interior.