Autopia.org - View Single Post

Lynn Phillips · 05-12-08, 06:07

This should help you through any of your surface care issues.

For the DAS ScratchBuster Pad or Sonus SFX-1 Swirl and Scratch Remover Pad, use a fine-cut compound to remove scratch & water spot damage. Use a swirl remover polish to remove heavy swirl marks with your speed setting at 4 to 6.

For the DAS SwirlBuster Pad or Sonus SFX-2 Paint Polishing Pad, use a swirl remover polish to remove swirl marks, oxidation and minor insect/bird damage with your speed setting set at 3 to 5.

For the DAS Polishing Pad, use with a final finish polish, pre-wax cleaner polish or a liquid cleaner/wax to maintain full paint gloss a remove fine very swirl marks with your speed set at about 3 on the dial.

For the DAS Wax and Finishing Pad or Sonus SFX-3 Final Finish & Wax Pad, use to apply your favorite liquid wax or paint sealant with your speed set at 1 to 3.

Remember to always use the least aggressive product you can to get the job done. The product you are using is on the more agressive side so if you just have some swirl or lighter issues you might want to step down in aggressiveness or only use it on areas where it may be needed.

Lynn

05-12-08, 06:07	#2 (permalink)
Lynn Phillips "The Car Girl" Lynn Phillips is offline Join Date: Mar 2003 Location: Sunny So Cal Posts: 593	Re: swirlbuster vs. scratchbuster pads This should help you through any of your surface care issues. For the DAS ScratchBuster Pad or Sonus SFX-1 Swirl and Scratch Remover Pad, use a fine-cut compound to remove scratch & water spot damage. Use a swirl remover polish to remove heavy swirl marks with your speed setting at 4 to 6. For the DAS SwirlBuster Pad or Sonus SFX-2 Paint Polishing Pad, use a swirl remover polish to remove swirl marks, oxidation and minor insect/bird damage with your speed setting set at 3 to 5. For the DAS Polishing Pad, use with a final finish polish, pre-wax cleaner polish or a liquid cleaner/wax to maintain full paint gloss a remove fine very swirl marks with your speed set at about 3 on the dial. For the DAS Wax and Finishing Pad or Sonus SFX-3 Final Finish & Wax Pad, use to apply your favorite liquid wax or paint sealant with your speed set at 1 to 3. Remember to always use the least aggressive product you can to get the job done. The product you are using is on the more agressive side so if you just have some swirl or lighter issues you might want to step down in aggressiveness or only use it on areas where it may be needed. Lynn __________________ The Perfect Shine LLC Home of Autopia Car Care, Sonus USA and Ultimate Detailing Machine.