[bert31]

Originally Posted by IanB

1. Power wash car for a rinse

2. Quick ONR wipe down of hood to prepare for polishing (swirls were already there, no reason to be careful imo)

3. All-Prep paint prep Wipe down (this stuff is awesome! from Walmart at 1.79 a liter, it removes all LSP's on your paint, and it really does!! Forget IPA)

4. Slap your 6.5 inch Orange LC pad onto the Rotary and apply a circle of SIP polish.

5. spread out polish with trigger on rotary using rotary with a slight 'pick up the bead' tilt

6. 1100 rpm's for 1 pass, 1500 rpms for 5 or 6 passes, 1200 rpm for 1 pass 1100 rpm 1 pass. (make sure you are in a good sized 2x2 area, smaller area will generate to much heat)

7. Prep-All wipe down, and inspect for swirls. None = go to 106FA for the burnished look. Other wise repeat 4-6 steps.

8. Slap your 6.5 inch White LC pad onto the rotary, add 106FA, then polish with the same process as above, except you only need 1500 rpm for 2 passes. Then follow the same zenith technique.

9. Prep-All wipe down. Looks good?

10. LSP of your choice. (Mine is Victoria Collectors Wax). Finished pictures.

What part of Walmart is the All Prep located?