So, that makes sense with the orange and yellow, I have honestly stopped using my 7.5 yellow pads on my Metabo rotary due to the fact that they are too darn difficult to work with, especially in tight places. They are almost too aggressive for any type of paint with 34A Powergloss without being unnecessarily careful. the 6.5 is just fine though, as I find it to be more effective with a RO/Flex than a with a rotary anyways, as it's unneeded.
Quote:
Originally Posted by tdekany  Those pads with the blue foam are the best pads for the rotary. Much easier to control the more dense pads like the orange and yellow. The velcro on them however suck.
Worst in the industry. |
Sounds like I should submit the thread to CCS & the vendor. Maybe this will initiate some improvements, seeing as us autopians are most likely one of their main customers.
Overall it seems like the lamination needs to be of much higher quality on the dual-foam pads, and they need to offer the OEM pad with the rounded edge and no other difference.