Autopia.org - View Single Post

Raz5219 · 04-27-08, 11:07

I broke out the PC yesterday for the 3rd time ever to detail my friends car. I have a 5.5"backing plate from Autogeek and was using brand new 6.5" & 5.5" LC foam pads.

At speed 6 The 6.5" white polishing pad with 106FF was jumping all over the place and even folding up over the backing plate making it very difficult to control and keep flat on the paint. The 5.5" orange with SIP was a bit better, but after doing the whole car, noticed hat the foam was breaking apart from the velcro on the pad. I used QD to spritz the pad before use and brushed any caked up polish off the pad during use.

I also had trouble keeping the pad attached to the velcro on the backing plate. The pad actually moved off the backing plate while polishing at speed 6.

What was I doing wrong? Is speed 6 too much with these pads?

04-27-08, 11:07	#1 (permalink)
Raz5219 Registered User Raz5219 is offline Join Date: Aug 2007 Posts: 170	Problems with pads on PC at speed 6 I broke out the PC yesterday for the 3rd time ever to detail my friends car. I have a 5.5"backing plate from Autogeek and was using brand new 6.5" & 5.5" LC foam pads. At speed 6 The 6.5" white polishing pad with 106FF was jumping all over the place and even folding up over the backing plate making it very difficult to control and keep flat on the paint. The 5.5" orange with SIP was a bit better, but after doing the whole car, noticed hat the foam was breaking apart from the velcro on the pad. I used QD to spritz the pad before use and brushed any caked up polish off the pad during use. I also had trouble keeping the pad attached to the velcro on the backing plate. The pad actually moved off the backing plate while polishing at speed 6. What was I doing wrong? Is speed 6 too much with these pads?