Quote:
Originally Posted by TTWAGN  ProperAutoCare is wrong.
Dont use the green pad with KAIO.
You are meant to go to a softer pad each process and a softer product too.
You start off with a cutting pad and a compound to remove the defects and move to a polishing pad and a polish. You then go to a finishing pad with a finishing polish as the finish gets more and more perfect. Just like sanding u start with a lower grit and finish with a fine sand paper.
You've just gone backwards and on soft paint that means marring.
If i used a green pad on my car to even apply a wax or sealant the whole car would be cloudy with marring due to the soft paint. |
Thanks, it seemed a bit backwards when I was ordering everything, but like I said, it said it right there on the damn website...green for KAIO. Live and learn
So, I can stick with the white LLC's for Menz IP and FPII, right?
The next softest LLC pad is the black one, should I use that if I want to apply KAIO with the
UDM?
So now I'm stuck with 5 green pads that I have not used....how can I best use those, which products would an Autopian use them for?
So can I now just go back over the entire car with FPII on a white pad to get the marring out?
Thanks!